Specifications

DESCRIPTION OF THE PRODUCT
BLUETOOTH FUNCTION
This device is capable of receiving a stereo audio signal from
a Bluetooth audio source device. Check the auxiliary device’s
instruction manual to make sure that the A2DP distribution prole is
supported.
EN
PORTABLE BLUETOOTH® SPEAKER
LYRA N1
2
2
31
1
7 8 9
4
5
6
1
7 / 8 Previous track / Next track
2
+/- Volume setting - / +
3
/ 12
Enables connection with Bluetooth
equipment in case of pairing with a
Bluetooth mobile device./ Play/Pause
4
Charge indicator light
5
Bluetooth indicator light
6
Microphone
7
OFF/ON On/Off
8
DC 5V Power socket
9
AUX IN
Connection socket for auxiliary devices
10
Speakers
PACKAGING CONTENTS
• 1 Bluetooth portable speaker
• 1 user manual
• 1 USB loading cable
INTRODUCTION
• The device has a rechargeable battery which requires initial
loading prior to use.
SPEAKER LOADING
Connect the power socket (8) to a computer or a mains/USB adapter
(not supplied) using the loading cable.
• The load indicator turns red during the loading process and
turns off when completed.
• The speaker can be loaded while it is on or off.
• A beep will be heard when battery load is low and the speaker
will automatically turn off.
• Input power: 5VDC
• Output power: 2W x 2(Max.)
• Impedance: 4 ohms
• Frequency response: 100Hz – 15kHz
TECHNICAL SPECIFICATIONS
Note: Unit design and specications are subject to change without
notice. The manufacturer reserves the right to make the necessary
improvements.
10
• Turn the Bluetooth speaker on: blinks rapidly.
• Activate the Bluetooth function of the auxiliary device and launch
a search for the LYRA N1 device. Conrm the prole found to
synchronise the two devices.
• When pairing has been successfully, achieved, the symbol will
blink more slowly. You can now play music from the Bluetooth
device.
• You can control playback from the LYRA N1 device or from the
auxiliary device.
Note: The above steps for Bluetooth connection are intended for
reference purposes only. Please refer to the instruction manual of the
Bluetooth device for more details.
DISCONNECTION/RECONNECTON TO THE BLUETOOTH AUDIO
SOURCE
• Press /12 on the device to pause the Bluetooth auxiliary
device.
• Press and hold /12 on the Bluetooth device to disconnect.
Note: Simultaneous connection of two Bluetooth audio auxiliary
devices to the LYRA N1 is not supported. The Bluetooth function of
the connected device must be disconnected before a new search for
the new Bluetooth device that you want to synchronise is conducted.
Note:
• When the speaker is outside the reach of the device, it is
disconnected and an automatic search for another Bluetooth
device is launched.
AUXILIARY FUNCTION
• Connect the socket of an MP3 player or Smartphone to the AUX
IN (9) input, using an audio jack/jack cable (not supplied).
• Turn the device on.
• Use the commands on the source device.
PHONE FUNCTION
• To answer a call when the Smartphone is connected, press /12
and speak through the microphone .
Note:
• The Bluetooth function is automatically disabled when the AUX
IN is connected, even when only the audio cable has been
disconnected from the plug.