Operation Manual

ST2030s VoIP Business Phone
ST2030s SIP Administrator Guide v3.0 Page 124 of 308
Where,
#LOGIN is the phone number of the active profile
#PASSWORD is the SIP password of the active profile
#IP is the IP address of the phone
#MAC is the MAC address of the phone
[sys]
…
RCallLogFlg=1 // the remote call logs is enabled
RCallLogURL=http://
…
ST20XX SIP New Features (SG vx.66.2)
Overview
This document describes a set of features included in ST2030 and S2022 SIP
v1.66.2 and 3.66.2 respectively in order to improve their usability in
different environments.
Transfer On ringing
[Transf] softkey should be able to show on ringing in MMI selectively
with/without respect to the CallForward bit in parameter “OptionVisible”.
Current implementation
Since x.61, [Transf] softkey enable/disable on ringing in MMI with respect to
the call forward bit in parameter “OptionVisible” accordingly.
In other words,
CallForward bit in parameter “OptionVisible” = 1  [Transf] softkey on
ringing shows on the screen.
CallForward bit in parameter “OptionVisible” = 0  [Transf] softkey on
ringing NOT shows on the screen.