Operation Manual

ST2030s VoIP Business Phone
ST2030s SIP Administrator Guide v3.0 Page 132 of 308
When ST20xx receives the SIP NOTIFY message, indicating successful profile
enrollment, it makes it effective immediately and displays service status to
the user. The duration of the subscription is 3600 by default.
Implementation and configuration
One function key will be affected to each service. Depending on the state of
the service, the corresponding function key‟s LED will be turned ON or OFF.
Referring to the above table, two status of service variable are well defined:
0 means Deactivation state
1 means Activation state
Table below describes lamp state with the corresponding variable state.
Variable State
Lamp state
0
Off
1
On
Service supervision is associated to a key of the phone; ST20xx provides the
ability to change the variable state by pressing the key. In all cases, it exists
one couple of activation/deactivation for each supervised service of the
supervised phone.
Activation and deactivation consists in initiating a basic call toward the
corresponding supervised phone, where the phone used depends on the
current status of the service.
Table below describes the two services which are used for
activation/deactivation for the supervised phone in Comverse environment.
Services
Variable
State
Lamp
state
When key is pressed
FCA
Secretarial
Filtering
0
OFF
INVITE sip: *270x*@domain.com
SIP/2.0
From: <…>
To: <sip:*270x*@domain.com>
(Where x is the phone number of
manager)
*270x*
1
ON
INVITE sip: *271x*@domain.com
SIP/2.0
From: <…>
To: <sip:*271x*@domain.com>
(Where x is the phone number of
manager)
*271x*
Hunting
Group
0
OFF
INVITE sip: *70x#@domain.com
SIP/2.0
From: <…>
*70x#