Digital Terrestrial HD Receiver THT504+ User Manual Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Manual do Utilizador Instrukcja obsługi Ръководство на потребителя Felhasználói kézikönyv Návod k obsluze
This product has been manufactured and sold under the responsibility of STRONG Group. THOMSON and the THOMSON logo are trademarks of Technicolor (S.A.) or its affiliates and are used under license by STRONG Group. Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna, Austria Email: support_at@thomsonstb.net Any other product, service, company, trade name and logo referenced herein are neither endorsed nor sponsored by Technicolor (S.A.) or its affiliates.
ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U.S.A.
TABLE OF CONTENTS 1.0 INTRODUCTION 3 1.1 Safety Instructions 3 1.2 Storage 3 1.3 Equipment Set-up 4 1.4 Accessories 4 1.5 Usage of external USB devices 4 2.0 YOUR RECEIVER 5 2.1 DEFAULT PIN: 1234 5 2.2 Front Panel 5 2.3 Rear Panel 5 2.4 Remote control 5 2.5 Installing the batteries 6 2.6 Using the remote control 6 3.0 CONNECTION 7 3.1 Connecting to a terrestrial antenna 7 3.2 Connecting to TV with HDMI cable 7 3.3 Connecting to TV with SCART cable 7 3.
1.1 Safety Instructions English 1.0 INTRODUCTION DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
the receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could damage the product and void your warranty. 1.3 Equipment Set-up We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below: -- Refer to the user manual of your TV and, if applicable, your antenna. -- Make sure that the HDMI cable and, if applicable, outdoor components are in a good condition.
STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. English 2.0 YOUR RECEIVER 2.1 DEFAULT PIN: 1234 2.2 Front Panel 1. 2. 3. 4. Fig. 1 IR sensor Point your remote control towards this sensor. 4 digits display: Indicates current time in STANDBY mode Indicates current channel number in OPERATING mode Mode indicator RED indicates that the receiver is in STANDBY mode. GREEN indicates that the receiver is in OPERATING mode.
5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. INFO Opens the current channel information; 2x opens the current event information and 3x the signal information VOL+/VOL- Increases/decreases the volume level MENU Opens the main menu, in a menu you will get one step back EXIT Exits from the menu or sub-menu pq Menu Off: Change channel to next/previous. Menu On: Moves the cursor up/down. tu Menu Off: Decreases/ increases the volume level.
NOTE: anaging the receiver will be limited or not possible if there are M obstacles between the remote control sensor (at the front panel of the receiver) and the remote control. Direct sunlight or very bright light can reduce or disturb the reception of the remote control signals. English To use the remote control, point it towards the front of your receiver. The remote control supports a range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees. 3.0 CONNECTION 3.
your Digital Audio Amplifier or home theatre system with a suitable cinch cable to the S / PDIF connector on the back of the receiver. 3.5 Connecting to a digital audio amplifier and TV using HDMI Fig. 6 By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy the best possible sound quality and multi-channel audio (depending on broadcast).
English broadcasts full screen on your 4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9 TV sets). Scan mode: Select All to store scrambled and free to air channels or select Free to store only free to air channels. Note: Scrambled channels cannot be viewed with this receiver. Connection: Use this option to adjust the established connection to your TV set. Select HDMI or TV SCART. *Availability of DVB/HoH subtitles depends on the broadcast.
Choose a channel with the pq buttons. Alternatively, you can digit the channel number with the 0~9 buttons on the remote control or press OK in viewing mode to display the channel list. The volume can be adjusted with the tu buttons. 6.0 OPERATION Your new receiver is equipped with several features to make watching TV a true pleasure. This paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of your receiver. 6.
Some channels support a choice of audio formats and/or languages. To select another audio stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to select a stream and confirm with OK. The audio channel as stereo, mono, left and right can be selected with the tu buttons. English 6.3 Selection of audio language 6.4 Teletext Your receiver includes a fully featured Teletext.
6.8 Instant Recording Your new receiver allows you to make an instant recording of the programme you are watching. Simply press RECORD to start the recording. To enter the duration for the recording, press RECORD again. Use the 0~9 buttons to enter the recording time and press OK to confirm. At the beginning of the recording a recording sign will be shown for a short while on the upper left corner of your TV screen. To stop the recording, press 3. Select Yes and press OK again to stop the recording.
English To lock or unlock a channel, press RED while in TV Channel List. Press pq to select a channel and press OK to lock or unlock it. You are asked to input the PIN code. (DEFAULT PIN: 1234) Locked channels will be marked with the symbol. Locking/unlocking multiple channels in one session is possible. When all changes have been made, press EXIT twice. A confirmation banner will pop up. Select Yes to save the changes or No to discard. 7.1.1.
them with OK. When you have finished editing, press BLUE to enter the changes. When all changes have been made, press EXIT twice. Select Yes to save the changes or No to discard. Delete Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected. Use pq to highlight a channel and press OK to mark it for deletion. When you have marked all channels you wish to delete, press EXIT twice. A confirmation banner will be displayed.
Use pq to select Installation, press OK or u to advance. Use pq to select Channel Scan and press OK to enter. Use tu to toggle between available scan modes: By Channel and By Frequency. If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press OK to start scanning. Newly found channels will be added to the channel list. English 7.2.2 Channel Scan 7.2.
7.3.2 TV System Use this menu to match your receiver to your TV set. The following settings are available: Video Resolution: Use this option to select the video resolution of your TV screen. The options are: By Source (automatic detection of video resolution offered to the receiver), By Native TV (automatic detection of maximal resolution of TV screen), and manual selections 480i, 576i up to 1080p. Please use a setting that matches the specifications of your TV.
This menu allows you to set up to 8 timed events for recording or waking up the receiver. Use pq to select Timer Setting from the System Setup menu and press OK to enter. The receiver will display a list with 8 timers, followed by their respective status. Select the timer you wish to set or change with pq and press OK to proceed. The timer setup menu will now be displayed.
7.3.7 Auto Standby Auto Standby is a new feature that helps you reducing power consumption. When set to 30Min/1 Hour/2 Hours or 3 Hours, the receiver will switch to standby if it doesn’t receive any commands during this time. Set Auto Standby to Off to deactivate the automatic standby function. 7.4 Tools Press MENU in viewing mode to enter the Main Menu. Select the Tools submenu with pq and press OK or u to enter. Use pq to highlight the submenu of choice and press OK proceed. Press EXIT to leave. 7.4.
English The upgrade menu will now be displayed. Use pq to select Upgrade Mode and choose option Allcode. Use pq to select Upgrade File and choose the file containing the latest and correct software. When all settings have been made, move the highlight to Start and press OK to start the upgrade process. After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select Yes to finalize the upgrade or No to quit without upgrading.
7.4.6 Auto-update OTA If set to On the unit will check automatically at the moment of going to stand-by for an Over The Air software upgrade. An Over The Air update might not be available in your region. Please visit our website www.thomsonstb.net or contact your local service hotline for more information about this option. 7.5 Games Your receiver is equipped with two games which can be played on your TV screen using the receiver remote control.
English Record: 2: Press 2 to enter a new name for the selected recording. 3: Highlight the recording that you want to lock. After pressing 3 you will be asked to input your PIN code. DEFAULT PIN: "1234". After entering your PIN code, the recording is locked. If you want to unlock the recording again, press 3 again. 4: Press 4 to mark the recording you want to delete. By selecting the same recording and pressing 4 again you can remove the delete marker again. Press EXIT to delete.
7.6.2 HDD Information This option shows relevant information about the connected USB device. In this menu you can also format your USB storage device and setup the recording type. Select HDD Information in the Media menu and press OK to enter. Now you will see all details as Free and the used Recording Sizes and the used file system. Press the YELLOW button Format to format the connected USB device. Please, enter your PIN code to access this menu and press OK to start formatting.
fter performing this function, the USB device is no longer A accessible from your receiver. To gain access to your storage device again, re-insert it or switch the receiver to standby and on again. 8.0 TROUBLESHOOTING English NOTE: There may be various reasons for abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact your dealer or the local Service Hotline.
Possible cause What to do After moving the receiver to another room/area you are no longer able to receive digital reception Problem Antenna signals are too weak The signal strength/quality might be less than before, if using an indoor antenna. Press the INFO button on remote 3x to call up signal bars and adjust antenna for (maximum) reception or rescan channels When using an active antenna, check antenna power. Try to use an outdoor antenna. The receiver switches off automatically.
Multimedia Video playback: MPEG-1 and MPEG-2 encoded (mpg), VOB, AVI, MKV, TS, M2T, M2TS, MPEG-4 and MOV* Audio playback: MP3 and OGG* Picture view: BMP and JPEG* English Memory and System Flash memory: 4 MB SDRAM: 64 MB * STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG codec formats are supported).
26
