THT91 Digital Terrestrial Receiver User manual Bedienungsanleitung Manuel d’utilisateur Manuale utente Look, Listen & Live www.thomsonstb.
08 Sep 2011 19:25 1.0 Instruction 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 1.5 Usage of external USB devices 2 2 3 3 4 4 2.0 Connection 2.1 Default PIN- code: 0000 4 4 3.0 Your Receiver 3.1 Remote Control 3.2 Installing the Batteries 3.3 Using the Remote Control 5 5 6 6 4.0 First Time Installation 6 5.0 Main Menu 5.1 Channel 5.2 Installation 5.3 Setup 5.4 Tools 5.5 Media+ 5.6 Time shift and Recording functions 6 6 8 9 10 11 13 6.0 OPERATION 6.
1.0 Instruction 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
English Servicing – Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. Damage Requiring Service – If you notice any of the conditions described below while using a specified AC adapter. Unplug it from the wall outlet and refer servicing to qualified service personnel: Liquid has been spilled onto the product or some other object has fallen into the product. The product has been exposed to water.
1.4 Accessories yy 1 User Manual yy 1 Remote control unit yy 2x Batteries (AAA type) yy 1 Infrared Eye yy USB to mini-USB converter cable. The batteries should not be recharged, disassembled, electrically short-circuited or be Note: mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote control. 1.
3.0 Your Receiver Fig. 5 SCART PORT To connect to your TV set. IR Sensor input To connect the IR eye plug DC IN To connect the power adapter plug (5 V DC/2 A). To TV To connect to the areal input of your TV or to a second receiver. 5. ANT IN To connect an antenna for reception of broadcasting signal (support antenna power 5 V DC). 6. Mini USB-Port To connect your USB storage device via the included converter cable. Your power adapter requires a main power source (100~240 V AC, 50/60 Hz +/-5%.
31. YELLOW For Teletext functions. In viewing mode freeze picture. Different functions in the specific menus. 32. BLUE For Teletext functions. Different functions in the specific menus. 3.2 Installing the Batteries Remove the battery cover from the remote control and put 2 x AAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1. Open the cover 2. Install batteries 3. Close the cover Fig.
5.1.1.1 Edit English Use this menu to lock, skip, delete or rename channels or add them to a favourite list. Press numeric button 1 to enter the Edit menu. Highlight a channel with the p/q buttons and press OK to select or press numeric button 0 to select all channels. Selected channels will be marked. This way of selection can be executed for each of the edit functions. Favor To add selected channel or all channels to a favourite group, press the 1 button.
5.1.2 Radio Channel list The operation of Radio Channel List is the same as in TV Channel List. Since there is no video information in Radio mode, the radio background will be displayed in the preview window on the right. 5.1.3 Delete Favourites And Groups Use this menu to delete all favourite channels and groups. Select Delete Favourites And Groups with p/q and press OK. Use t/u to select Yes in the confirmation window and press OK to delete or select No to cancel. 5.1.
5.2.4 LCN Mode English If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator, channels will be stored in operator defined order. You can activate/deactivate the LCN function by setting the LCN Mode to ON or OFF. 5.3 Setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting, Parental Lock and Auto Standby. 1. Use p/q to highlight the desired menu and press OK to proceed.
5.3.5 Timer Setting Use this menu to setup programme timers or sleep timers. Programme timer Timer Number: Timer Mode: Timer Service: Wake-up Channel: Month/Date/Day: Time: Duration: Auto Record: You can set up to 8 timers Off/Once/Daily/Weekly/Monthly TV Service/Radio Service You can select any channel as wake-up channel. Use p/q to select the start month, date and day. Press OK to input the time with the numeric buttons. When you leave the programme timer, a saving window appears.
5.4.2 Game NOTE: English This menu allows you to play games (Tetris, Snake and Othello) on this receiver. 1. Select "Game” in Tools menu and press OK to enter the game menu. 2. Use p/q to select a desired game, and press OK to enter the game. Highlight Start and press OK to start the game. For changing levels highlight Setup and use the t/u buttons. 3. Press EXIT/SORTIE to quit the game. Press OK during a game to pause playing. 5.4.
5.5.1 Media Player This function allows you to play MPEG-1, MPEG-2, audio and photo files from a connected storage device. 1. In Media+ menu, select Media Player and press OK to enter Media Player menu. 2. Use p/q to select a desired item, and press OK or 1 to start playback. 3. Press EXIT/SORTIE to exit. 5.5.2 Record Manager This menu allows you to playback earlier recorded files. 1. In Media+ menu, select Record Manager and press OK to enter Record Manager menu. 2.
5.5.6 Disk Format Warning: English 1. In Media+ menu, select Disk Format and press OK to enter this menu. The receiver will ask to input the password. (default:0000) The receiver displays the current Device and Partition. Furthermore the available Capability in GB is shown. 2. In FileSystem The USB device can be formatted in FAT file system. Formatting will permanently delete all data on your storage device !! Press EXIT/SORTIE to get back to Media+ menu. 5.
WARNING: Please consider that Time shift needs min. 0,58 GB free space on the USB device and an accurate Time shift function is depending on the speed of the used USB device. 6.0 OPERATION 6.1 Changing Channels There are 4 ways of channel selection: stepping through the channel list, selection by number, from the on-screen channel list, and by using the electronic programme guide (EPG) Stepping through the channel list To move through the channel list, use the p/q buttons on the remote control.
7.
8.0 Specifications Demodulator: Demodulator: 16 QAM/64 QAM, QPSK Transmission mode: 2 K - 8 K Video Decoder: Profile level: MPEG-2 MP@ML Video resolution: 720 x 576 pixels (PAL), 720 x 480 (NTSC) Decoding & Video Out: PAL & NTSC Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9, AUTO Audio Decoder: MPEG MusiCam Layer II Sampling rate: 32, 44.
