Thon LP Studio Rack studio rack assembly instructions
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 12.11.
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 4 2 Scope of delivery.............................................................................................................................................................................................................. 5 3 Installation..
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Scope of delivery 2 Scope of delivery Before you assemble your rack, make sure the contents of package is complete according to the following list.
Installation 3 Installation Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces. Overview The following figure shows an overview of the individual components.
Installation Insert the connector housing and the connecting bolts into the holes provided in the components, as shown in the figure below. Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow posi‐ tion of the connector housings points towards the hole. After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐ ated component are tightened.
Installation Place the base onto the connecting bolts of the lower base panel and the upper floor panel onto the connecting bolts of the front panel. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts. ' ( % ) 4 Lower floor panel 7 Base 6 Upper floor panel 8 Front panel Place the rear wall and the base panels onto the connecting bolts of the left side panel.
Technical specifications 4 Technical specifications Thon Studio Rack WH, white Item number 503341 Thon Studio Rack bk, graphite Item number 503342 Dimensions (W × H × D) 379 mm × 1047 mm × 360 mm Weight approx. 19.
Protecting the environment 5 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
