Thon Studio Producer Desk 1750 / curved studio desk assembly instructions
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 22.11.2021, ID: 507338, 507336, 507339, ...
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 4 2 Scope of delivery.............................................................................................................................................................................................................. 5 3 Installation..
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Scope of delivery 2 Scope of delivery Before you assemble the studio desk, make sure the contents of package is complete according to the following list. Thon Studio Producer Desk 1750 / Thon Studio Prod.
Installation 3 Installation Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces. 3.1 Thon Studio Producer Desk 1750 / Thon Studio Prod.Desk 1750 curved Overview The following figure shows an overview of the individual components. ö # A 1 Table top 2 Table top curved A Screw M8 × 30 B Washer C Euro screw D Tapping screw E Cable feed-through B C D E 3.
Installation Thon Studio Producer Drawer (item # 507364) Slide the shelf of the keyboard extension into the drawers and fasten the components together with the screws provided. Attach the brackets to the drawers at the required height with four M4 × 4 screws (F) each. Fasten the assembled keyboard drawer with eight raised countersunk screws M6 × 14 (G) in the flush-mounted threaded sleeves for M6 threads on the underside of the table top.
Installation 3.3 Mounting options for optional accessories 3.3.
Installation C * * * G , 6 Roadworx Multi Electric Stand (item # 491963) 7 the t.racks Power 3 USB (item # 437416) 8 Operating element Roadworx Multi Electric Stand (item # 491963) 9 Thon Studio Cable bridge (item # 507362) 10 the t.
Installation 3.3.2 Thon Studio Prod.
Installation C * * G , 6 Roadworx Multi Electric Stand (item # 491963) 7 the t.racks Power 3 USB (item # 437416) 8 Operating element Roadworx Multi Electric Stand (item # 491963) 9 Thon Studio Cable bridge (item # 507362) 10 the t.
Installation 3.4 Thon Studio Extension Desk 3U / Thon Studio Ext. Desk 3U curved Overview The following figure shows an overview of the individual components.
Installation Mounting Thon Studio Extension Desk 3U Put the connecting bolts into the drill holes provided in the monitor bridge (8 × connecting bolts) and the connector housings into the drill holes provided in the side panels (2 × connector housings each). Insert the cable feed-throughs into the recesses of the monitor bridge from above. After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐ ated component are tightened.
Installation Turn the tabletop over so the bottom is facing up. Place pieces of wood under the drill holes to prevent the coating from cracking out when drilling. Using a 4mm bit, drill the eight holes through the pre-punched positions on the underside of the table top. Turn the tabletop over so the top is facing up. Insert the long wood screws from below through the drill holes in the table top and attach the assembled unit consisting of the monitor bridge and side panels to the table top.
Installation Montage Thon Studio Ext. Desk 3U curved Put the connecting bolts into the drill holes provided in the monitor bridge (12 × connecting bolts) and the connector housings into the drill holes provided in the side panels (2 × connector housings each). Insert the cable feed-throughs into the recesses of the monitor bridge from above. After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐ ated component are tightened.
Installation Turn the tabletop over so the bottom is facing up. Place pieces of wood under the drill holes to prevent the coating from cracking out when drilling. Using a 4mm bit, drill the twelve holes through the pre-punched positions on the underside of the table top. Turn the tabletop over so the top is facing up. Insert the long wood screws from below through the drill holes in the table top and attach the assembled unit consisting of the monitor bridge and side panels to the table top.
Technical specifications 4 Technical specifications Thon Studio Producer Desk 1750 Thon Studio Producer Top 1750 BK, graphite black Item number 507338 Thon Studio Producer Top 1750 WH, white Item number 507336 Thon Studio Producer Desk 1750 oak Item number 507339 Thon Studio Prod. Desk 1750 maple Item number 528673 Thon Studio Prod. Desk 1750 beech Item number 528672 Dimensions (W × H × D) 1750 mm × 19 mm × 790 mm Weight approx. 17.3 kg Thon Studio Prod.Desk 1750 curved Thon Studio Prod.
Technical specifications Thon Studio Ext. Desk 3U curved Thon Studio Ext. Desk 3U BK curved, graphite black Item number 507358 Thon Studio Ext. Desk 3U WH curved, white Item number 507357 Thon Studio Ext. Desk 3U oak curved Item number 507359 Thon Studio Ext.Desk3U Maple curved Item number 528677 Thon Studio Ext.Desk3U Beech curved Item number 528674 Dimensions (W × H × D) 1750 mm × 159 mm × 324 mm Weight approx. 10.
Protecting the environment 5 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes studio desk 20
Notes Thon Studio Producer Desk 1750 / curved 21
Notes studio desk 22
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.