HOW TO INSTALL PIPING
Dishwasher Installation Preparation 2 503/8” 25 1/2” 233/4” 23” Property Damage Do not use the furnished drain hose or a rubber garden hose for the water supply line. Either of these hoses can burst. Flooding may occur and cause property damage. NOTE: Put unit on its back being careful not to pinch the Water Drain Hose. Installation Instructions 1. Remove two (2) screws at front of the kickplate using a #2 Phillips screwdriver. 2. Tilt and pull forward to remove see figure 1a.
HOW TO INSTALL POWER CORD
We cannot provide power cords because the distance from the socket to the dishwasher is different for every customer.
Lay down the dishwasher, and open the bracket in yellow color.
Open the braket in yellow color.
Put powder cord into the bracket.
Connect dishwasher wires to power cord wires accordingly.
Screw down the bracket.
Dishwasher complete with powder cord.
