Manual Spec Sheet

Operating dishwasher
Delay
14
To delay the start of a selected Delay
Start
pad until the desired delay time shows in the
LED
display screen, it allows you to
automatically
start
your
dishwasher for 1 to 24 hours delay .
To cancel the Delay Start option and begin the
cycle,
before the delay period is over press the
Start Cancel/
pad.
16
Start Cancel/
7
14 15 16
17
18
19
17
Rinse aid indicator light
Turns on when the dishwasher needs to add Rinse aid.
18
Sanitized indicator light
If a cycle with the sanitize function is finished,
the sanitized indicator light turns on.
If you open the door, it will turn off after 30 seconds.
18
Clean indicator light
Turns on after a cycle finished.
If you open the door, it will turn off after 30 seconds.
15
Display window
To display the remained hours and minutes of the
running cycle, delay hours and error codes etc.
WASH
When the dishwasher is in a wash or rinse portion of a cycle the Wash lights are ,
illuminated.
DRY
When the dishwasher is in a drying portion of a cycle the Wash and Dry lights are,
illuminated.
CLEAN
After the dishwasher has completed all portions of a cycle all indicator lights are ,
If you open the door when the Cleaning lights are illuminated, all the portion lights
will turn off after 30seconds.
illuminated.
Cycle progress indicator
Located on ride side of the front of the dishwasher, these lights indicate how far along is the current wash cycle while
the dishwasher is running.
1 2 3
1
2
3
This information covers several different models.
Your dishwasher may not have all the cycles and
options described.
This built-in dishwasher’s function control and
cycle selections will be void when dishwasher
door is firmly closed. When setting up the
dishwasher, please keep the dishwasher door
open and select the wash cycle and options
desired. The indicator light above the pad will
turn on. To start, press the Start/Cancel key
once and close the door firmly within 4 seconds
after you select start. The indicator light will
flickering and the wash cycle will begin after the
door is closed. To cancel wash cycle once the
dishwasher is running, carefully open the door
slowly to access the controls and avoid water
spill. Long press Start/Cancel for 8 second, the
dishwasher will start a 60 second draining
process to prevent water and moister trap inside
the dishwasher. The dishwasher will be power
off automatically when draining process is
completed. You may then open the unit and/or
start a new cycle.
When opening the door, use caution as there is
a possibility of injury from hot steam coming out
from the unit. If the door is opened while the
dishwasher is running, a safety switch will stop
the cycle.
You may add more dishes before the main wash
starts.