CARE AND USER MANUAL Thor Kitchen Refrigerator User Instructions Model: HRF3601F Please read this manual carefully before using the product
Thank you for choosing THOR KITCHEN. This refrigerator has been manufactured by Thor Group, 13831 Oaks Avenue Chino, CA 91710. This manual contains all the information you will need to install/use your refrigerator correctly and safely. Please read all the instructions prior using the appliance, and keep this manual in a secure place for future reference. Do not remove the attached adhesive identification label containing code, model number, manufacturer and other information from the refrigerator.
Table of Contents Safety .............................................................................................................................................. 03 Product Description ....................................................................................................................... 05 Installation ...................................................................................................................................... 07 Placing .......................................
Safety Child Safety Guide Please keep children from entering or climbing the refrigerator to prevent children from locking inside the refrigerator or hurting themselves when the refrigerator falls. DO NOT let the children near the refrigerator when open and close the doors. Children should be supervised to ensure that they don’t play with the appliance. User Safety Guide Never pull out the electric plug by pulling the power cable. Always hold the plug head and pull it out from the socket.
When power outage or cleaning, pull out the plug. Turn on the power supply after at least five minutes to avoid that repeated startup might damage the compressor. When the refrigerator is out of service, please take down the refrigerator's door, remove the door seal and shelves and put them at proper places to avoid that children might play inside and cause accident. This product is a household refrigerator and is only suitable for storage of food according to state standards.
Product Description 6 1 5 2 Refrigerator body 3 7 8 9 11 10 13 12 4 Display Ice storage box Left door for refrigerator compartment Ice scoop Upper door for freezer compartment Partition plate for lower freezer drawer Lower door for freezer compartment Partition plate for upper freezer drawer Door handle Upper freezer drawer Right door for refrigerator compartment Lower freezer drawer Drawer handle
Left door for refrigerator compartment Right door for refrigerator compartment Cantilever rack Butter box Turnover beam Air duct cover plate Sliding cantilever rack Folded cantilever rack Fruit and vegetable drawer Side lamp for refrigerator compartment Small drawer Gallon bottle rack (With egg bracket) Big drawer Special-shaped bottle rack Automatic ice maker Top lamp for freezer compartment Drawer handle Upper door for freezer compartment Leveling leg Lower door for freezer compartment
Installation Remove all packaging material before using the new refrigerator. This includes the foam base and all adhesive tape holding the refrigerator accessories both inside and outside.
Placing Place your refrigerator in a well-ventilated place and keep it from heat source and direct sunlight. DO NOT place it in any humid or wet place to avoid rust and weakening of insulation effect. There shall be a space not less than 30 cm from the top of your refrigerator and not less than 10cm from both sides or the back of the refrigerator to the adjacent walls respectively. This requirement is good for open and close of refrigerator door and heat emission.
Start to Use You ought to get a good knowledge of all safety precautions and make sure that your refrigerator has been placed properly in its final position before using. 1. Unpacking Please install the decorative cover for bottom beam onto your refrigerator after unpacking and adjust the front leveling legs to level your refrigerator. 2.
Refrigerator Compartment Adjustment of cantilever rack Though the temperature-adjustable device could keep most of the refrigerator compartment at an average temperature around 2°C - 8°C (35.6°F – 46.4°F), it fails to preserve the freshness of food for long. As a result, the refrigerator compartment can be used only for short term storage. Use of Turnover Beam Please keep strictly to the warnings on the label of the turnover beam. It is a normal phenomenon that the surface of the turnover beam is hot.
Food suggested to store in refrigerator compartment 1. Cooked Wheaten Food, Cans, Milk, …Etc. 2. Snack Food, Food Subject to Tainting, Dairy Product 3. Cooked Cold Meat, Sausage 4. Fruit, Vegetables 5. Eggs, Butter, Cheese 6. Cans, Seasoning 7. Drinks, Other Bottled Food Freezer Compartment The temperature in the freezer compartment is very low, so it could preserve the freshness of food for a long period of time.
Taking-Out and Installation of The Lower Freezer Drawer 1. Pull out the lower freezer drawer first. 2. Take out the two fixed screws from the partition plate of the lower freezer drawer with screw driver and then take off the partition plate. 3. Take off the rear stopper for the lower drawer as shown by Fig. A. 4. Take out the lower drawer body with force as directed by the arrows in Fig. B. 5. The installation of the lower drawer body is conducted in the reverse order.
Big Drawer The big drawer has a maximum load of 10kg. Pull out and install the big drawer 1. Pull out the big drawer; 2. Find the hook at the left and right sides at the drawer bottom (shown in the figure). 3. Hold the hook at two sides with a nose pliers or tweezers and push it up and out of the groove of sliding rail, and take out the hook at the other side with the same method. 4. Take out the drawer. 5. Install the drawer by putting the hook into the right place.
Ice-Maker Operating Instructions on The Ice-Maker 1. When using your refrigerator for the first time, start the ice-maker after 20min. The ice-maker is capable of producing 1.0 - 1.1Kg of ice in 24hrs, depending on the temperature of your freezer compartment, surrounding temperature, frequency of door opening/closing and other working conditions. 2.
Take Out, Clean and Install the Ice Cube Box lf the ice maker isn't used for a long period, ice cubes that are just produced might have unpleasant smell. You must take out and clean the ice cube box. Open the upper drawer in the freezer compartment, rotate the knob of ice maker counterclockwise by 90, turn the handle from the horizontal position to vertical position to release the lock (as shown in Fig. 1 of Pg. 14), pull it out (as shown in Fig. 2 of Pg. 14) and take out the ice cube box.
Take Out and Install the Ice Maker When the ice maker isn't used, it could be taken out and the vacated space could be used as a part of the freezer compartment. Push the Ice Maker button on the control panel at the refrigerator door and the icemaking indicator light will disappears. Open the door and take out the drawer. Pull the ice-maker out (as shown in Fig.1), and then downwards, so that the ice maker is unhooked (as shown in Fig. 2).
Door Handles Assembly Instructions of Cold Storage Door Handle: 1. 2. 3. Take the handle set bolts out from the refrigerator, use cross recessed screwdriver to set the bolt on the door. Fix it tight with all the screw thread twisted through the hole, as shown in the figure; After the first step is completed, take the Cold storage door handle out from the box, place it as per direction shown in the figure (Note: i.e.
Making Minor Adjustments Between Doors Remember it is necessary to level your refrigerator for getting the doors perfectly even. If you need additional help on adjusting the doors, please review previous section on leveling the refrigerator. Do As Follows 1) Raise the left door or the right door to make your refrigerator.
Installing the Water Line Installing the Water Line Water line installation kits are available as an additional accessory from your dealer or at a local hardware store. Connecting To The Water Supply Line 1. First, shut off the main water supply line and turn the ice-maker off. 2. Locate the nearest cold water supply valve. 3. After connecting the water supply to the water valve, turn your main water supply back on and flush several gallons of water to clear the water supply line.
1.First, water tubes (supplied) insert Into corresponding hole of water connector (supplied). 2.Second. water line installation kit (not included) inserts into another hole of water connector (supplied). 3.Turn water valve on and check for any leakage Only Connect The Water Line To A Drinkable Water Source. If your water line is NOT drinkable, please add an external water filter. If you must repair or disassemble the water line, cut off the plastic tubing to make sure you get a snug, leak-free connection.
Introduction Of Your Refrigerator's Functions 7 1 HOLD 3 HOLD 9 13 15 17 18 10 8 close 5 HOLD 2 HOLD 4 HOLD 11 14 16 19 6 12 Initial Power-On Status All on Locking And Unlocking When the “LOCK” icon on the display screen is not illuminated, the control panel is not locked. Press the CHILD LOCK on in order to ac vate the child-proof lock. The “LOCK” icon will illuminate and the control panel will be locked. To unlock, press and hold the CHILD LOCK icon on for three seconds.
Introduction Of Your Refrigerator's Functions Energy Saving Mode Energy Saving Mode sets the temperature in the refrigerator at 7°C and the temperature in the freezer at-15°C, “AUTO” mode default settings are 5°C and -18 °C, respectively. To activate the "Energy Saving" mode, press the ENERGYSAVING MODE Button, then the "ENERGYSAVING" icon will illuminate. Enabling the energy saving mode for the refrigerator win automatically disable all other modes.
Introduction Of Your Refrigerator's Functions Fast-Freezing Mode This function is used to counteract a sudden rise in the freezer compartment in order to preserve the nutritional content of the food. it is recommended that this mode be activated at least two hours before a large quantity of items is placed into the freezer. To activate the “Fast-freezing” mode: Press FRZ Temp for three seconds and the Super Frz. icon will illuminate.
Introduction Of Your Refrigerator's Functions To Set The Temperature Of The Freezer Compartment Press the FRZ.TEMP button and the Freezer Temperature digital display will illuminate. To change the temperature setting, press the FRZ. TEMP. button again, until the desired temperature is displayed. The temperature of the freezer compartment can be adjusted between -13 and -22 degrees C with a step of 1°C or between 9 and -8 degrees Fahrenheit with a step of 1 °F.
Cleaning And Maintenance Refrigerator's Maintenance and Repair: Cleaning Clean regularly to remove dust from the back of refrigerator and ground. Clean regularly the space inside the refrigerator to avoid any unpleasant smell. Before cleaning, pull out the power cord and use soft towels and neutral detergent and clean it thoroughly with clear water. It is recommended to clean the power cord/plug once in a half year.
Solutions To Problems Please read the following contents before repair request: If the situation doesn't turn better after you have checked all above items, please contact with the after-sales Service Centers. If power cables are damaged, please get it changed by the repairmen designated by our Service Centers to avoid any risk Normal phenomena not regarded as malfunctioning Refrigerant inside the capillary tubes of the refrigerator flow in high speed and might have a few amounts of bubbles.
Thor Group Refrigerator Warranty 2 YEAR LIMITED WARRANTY ON PARTS AND LABOR For two year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached to or furnished with the product, Thor Group will pay for Factory Specified Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Thor Group designated service technician.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. THOR GROUP SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you.
