Installation Guide

Safety and Warnings
2
To reduce the risk of fire, electrical shock, injury to persons, or damage when using
the appliance, follow the important safety instructions listed below:
Electrical Shock Hazard
Before removing a faulty oven light bulb, make sure you turn
the power to the range off at the main fuse or circuit breaker
panel. If you don’t know how to do this, contact an electrician.
Do not remove the kick strip grate. Due to access to live
electrical parts behind it, the kick strip grate should only be
removed by a qualified technician.
This appliance is equipped with a three-prong grounding plug
for your protection against shock hazard and should be plugged
directly into a properly grounded power outlet.Do not under any
circumstances cut or remove the grounding prong from this
plug.
Failure to follow this advice may result in death or electrical
shock.
Tipping Hazard
All ranges can tip and cause injuries. Install the anti-tip device
supplied with your range. Follow all installation instructions.
Make sure anti-tip device is installed:
Slide range forward.
Install the anti-tip device as described in the instruction.
Safely tilt the front section of the range and slide the range
slowly back against the wall.
The rear pins should slide under the bracket.
Do not use the appliance until it has been secured.
Failure to follow this advice may result in serious injury.