User Manual & Installation Guide

9
It is the responsibility of the installer to make certain that the range top is properly
adjusted at the time of installation. Situations caused by improper adjustments or
improper installation are not covered under the warranty. Any expenses incurred due to
such situations will not be paid by the manufacturer of the appliance.
GAS RANGETOP SPECIFICATIONS
Installation without a range hood
Note: All the measurement was based on 24” (61 cm) deep cabinet
This range top may be installed directly adjacent to existing 36” (91.4 cm) high base cabinets.
The range top CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall
appliances, or other side vertical surfaces above 36” (91.4 cm) high. There must be a
minimum of 6” (15.2 cm) side clearance from the
Range top to such combustible surfaces above the 36” (91.4 cm) counter height.
Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4
cm), the maximum wall cabinet depth must be 13” (33.0 cm) and wall cabinets within this
6” (15.2 cm) side clearance must be 18” (45.7 cm)
above the 36” (91.4 cm) high countertop.
Wall cabinets above the range top must be a minimum of 42” (106.7 cm) above the range top
cooking surface for the full width of the rangetop. This minimum height requirement does not
apply if a range top hood is installed over the cooking surface.