Manual

8
 INSTALLING STAINLESS STEEL HANDLE
This cooler includes two stainless steel handles that are not installed by the factory. To install the
handle please follow the below instructions:
1. Pull away the door gasket in the area where the handle is to be installed as shown below in
Illustration # 1. The gasket is easily displaced by hand, no tools
are necessary.
2. Align the handle with the screws pre-installed on the backside of the door. Tighten the
screws using a Phillips head screwdriver until the handle sets bo
th flush and secured tightly
against the door frame. (DO NOT overtighten as this will cause dam
age to the handle
assembly).
3. Replace the door gasket to its original position.
①□ Gr
asket
②□ Screw driver
③□ S/S Handle
 WIRING DIAGRAM