Instruction Manual

COMMISSIONING THE COOKTOP

• The electric cooktop must be installed by qualiﬁed installer.

• Do not place cooktop next to open ﬁres, heaters or other sources of heat.

• Make sure that the mains connection cable is not damaged or squashed beneath the

cooktop

• Make sure that the mains connection cable does not come into contact with sharp

edges and/or hot surfaces.

• The cooktop should be connecting to the power source which is sufﬁcient secured.

• Do not install the cooktop above a dishwasher or washing-machine, because the elec-

tronic circuits do not come into contact with steam or moisture which could damage

them.

• Before connecting the cooktop, check whether the voltage indicated on the type plate

corresponds to the voltage supply in your home. A wrong connection may lead to grave

damage on the cooktop and injured.

• The cooktop surface is made of temperature-resistant ceramics. If it is damaged,

even if this concerns only a small tear, disconnect the cooktop from the power supply

immediately and contact the customer service.

• We recommend not placing any metal Kitchenware, cookware or pan lids, knives or

other metal objects on the cooktop. These may heat up when the cooktop is turned on.

• Do not place any magnetically objects like credit cards, cassettes etc. on the glass

surface while the cooktop is in operation.

• In order to avoid overheating, do not place any aluminium foil or metal plates on the

cooktop.

• Do not insert any objects like wires or tools into the ventilation slots.

ATTENTION: THIS MAY CAUSE ELECTRIC SHOCKS.

• Do not touch the hot surface of the cooktop.

• Do not heat up any unopened tins on the cooktop, or a heated tin could be exploded;

therefore you must remove the tin lid under all circumstances beforehand.