Instruction Manual

Residual heat indicator
When the cooktop has been operating for some time, there will be some residual heat.
The residual heat indicator warns for each cooking zone separately with "H" symbol.
Timer
After you have selected the power press the timer key .
Timer confirmation
With repeated pressing onto timer key choose the zones you want to set as the LED
light showing. The display shows "00". With the keys "0-9" set the time in 1-minute
steps (max. 99 min.) After 5 seconds no number level key be pressed, the time will start
timing and the display will indicate the countdown time until to “00”. If the two zones
has been set different time, the display will indicate the less time setting zone.
Timer cancellation
By pressing onto timer key choose the zone you want to cancel the timer. Then press
number level key”0” two times and the timer function will be cancelled.
Or press the button for three seconds; timer function for all zones will be cancelled.
Safety systems
In order to protect the electronics from overheating if the control unit detects excessive
heat it will switch off the cooktop closest to the sensors and the letter H will appear
on the display. This cooktop can be activated when the temperature of the electronic
unit returns to normal. Each cooktop is equipped with an interior temperature limiter
that switches off the cooktop if the radiant surface is heated excessively. If any cracks
appear in the radiant surface, immediately disconnect it from the power. Do not use any
part of the cooktop until a new radiant surface has been fitted.
Automatic
If a cooktop is left on accidentally, it will automatically be switched off after a period of
time has elapsed, depending on the power level that has been selected
Key Lock (Child lock)
To ensure the safety of children, the ceramic cooktop is fitted with an interlock cooktop.
To lock: hold the button for 3 seconds; the timer shows “L0” and the rest of the keys
are disabled except the
on/off button. To unlock hold down the lock key for 3 seconds and the cooktop will
return to normal working.
COOKTOP FEATURE
10