Gas Range Manual

Troubleshooting Guide
47
The flames have
suddenly gone out.
A draft or a spill has extinguished
the flame.
No action required. The burner will
detect this and automatically
relight. However,
if there has been a large spill, we
recommend turning the burners off
and cleaning the burners and sump
area. See
‘Care and cleaning’ for instructions.
There is a power
failure – can I still use
the cooktop burners?
Power outage in your area.
The cooktop burners can still be
used. To light them:
1.Holding a lighted match to the
flame spreader, push in on the
control knob and turn
counterclockwise to LITE.
2.When the flame is burning all the
way around the burner, you may
adjust the heat.
Important!
If the flame is blown out during a
power failure, turn the knob
immediately to OFF, as the burner
will not automatically relight and
gas may escape.