Green Board with Switch Manual
Table Of Contents
THOR Technologies Pty Ltd.
PO Box 95, Karrinyup Western Australia 6921
Designed & Engineered in Australia. Made in China
In the interest of product improvement and development THOR Technologies reserves the right at any time
to modify or alter product design.
MODEL B12R
INTEGRATED FILTER & SURGE PROTECTION
www.thortechnologies.com.au
SAVE MONEY – TURN OFF STANDBY POWER
greenBoard-hoWdoesitWork?
The Green Board is designed to save power to devices that are in standby but still
consuming power. The unique remote switch (Bank 2) allows 4 outlets on the remote bank
to be completely turned off.
The other 4 outlets (Bank 1) remain on for devices like pay TV decoders or any recording
device that needs to be on permanently so as to perform time related tasks like recording.
This allows the user to get the best of both worlds while saving on energy consumption
and therefore saving money too.
As an added bonus the remote button has a clever USB charging circuit built into the
switch cover. The circuit will allow a single power hungry iPhone to charge or two other
devices like an MP3 player, camera or phone charger.
Our Research and Development team have come up with another Australian first!
INSIDE OUR GREEN BOARD
• LED control resistors
• Toroidal coils for maximum filtration
• AV/TV protected outlets - Now with BOTH dedicated Co-Ax and F-Type aerial
protection. RJ 45 Data Protection - 1 line in, 2 lines out. For standard 75
Ohm Co-ax cables.
• Extra large metal oxide protection varistors
• Safety fuses
• Protection on all 3 conductors (Active, Neutral and Earth)
• Polyester Film Capacitors to Prevent inter-circuit interference (EMF, EMI and RFI).
• Safety Bleeder Resistor
• High Voltage Diodes
• Ultra Fast DC Protection Circuit
• Resettable safety 10 amp circuit breaker
THE REMOTE SWITCH
The remote switch has an extra long cable to connect into the side of the board ensuring
there is ample lead for even the largest systems. The cable ensures there is power for the
USB chargers as well as allowing the operator to easily switch the remote power saving
bank “on” or “off” easily. No need to worry about replacing batteries either.
The two LED lights on the button switch indicate there is power to the USB charger and
also alerts the user if the remote bank is turned on or off.
The LED lights have been placed at the rear of the switch so as to offer a softer
illumination when in a dark environment. Even when power is switched off your valuable
devices are still being protected.
The two combined USB chargers can handle up to 1Amp in connected devices to charge.
This means that up to two devices can be charging at the same time, how convenient
is that?
SPECIFICATIONS
•SupplyVoltage 240/Vac 50/Hz
•MaximumCurrentRating 10amps/2400 W (V
a)
•ClampingVoltage275V
ac
•ReactionTime Less than 1 Nano Sec
•MaximumTransientSpike Impulse Current
(AMPS) 196,000 amps. Equivalent to 49,000
Amps using UL1449 standard
•MaximumEnergyDissipation (Joules) 4890
Joules. Equivalent to 1750 Joules
using UL1449 standard
•ProtectionModes(all8outlets Protects on all
3 conductors) Active/Neutral, Active/Earth,
Neutral/Earth
•EMI/RFINoiseReduction Filter Type. Cascade
dual bank isolation with 2 cascading circuits
•NumberofMulti-Stage Filter Banks 2
•NumberofIsolatedBanks2
•NumberofDedicated Outlets 4+4
•TotalNumberofProtected AC Outlets 8
•RJ45DataProtection (1 in - 2 out)
•AV/TVConnectionIn&Out
•CableTV‘F’ Type Connection In & Out
•EarthPotentialRiseProtection
•EarthleakageRange Less than 1 milli amp
•Operatingconditions Indoor/AC Mains
•OperatingTemperatures - 10C/+60C
•SafetyApprovalNo5287
•Cablelength1.8m
•ModelNoB12R
Bank02
Bank01
Network/Data & Aerial Protection


