MSDS

Material Safety Data Sheet
ACRYL 60
Version 2.2 06/29/2006
Page 2 of 6
medical attention.
Skin contact : Remove contaminated clothing. Wash thoroughly with soap and water. If irritation
persists seek medical attention. Wash contaminated clothing before reuse.
Ingestion : Do not induce vomiting without medical advice. If conscious, drink plenty of water. If a
person feels unwell or symptoms of skin irritation appear, consult a physician. If a person
vomits, place him/her in the recovery position. Never give anything by mouth to an
unconscious person.
Inhalation : Remove victim from exposure. If difficulty with breathing, administer oxygen. If breathing
has stopped administer artificial respiration, preferably mouth-to-mouth. Seek immediate
medical attention.
5. FIRE-FIGHTING MEASURES
Flash point : Not combustible.
Autoignition temperature : Not combustible.
Lower explosion limit : no data available
Upper explosion limit : no data available
Suitable extinguishing media : Carbon dioxide, foam, dry chemical & water fog.
Fire and Explosion Hazards : Containers can build up pressure if exposed to heat (fire). Cool closed containers
exposed to fire with water spray.
Special Fire-fighting Procedures : As in any fire, wear pressure demand self-contained breathing apparatus (NIOSH
approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Methods for cleaning up : Wear appropriate protective equipment (refer to section 8). Take action to eliminate
source of leak; prevent from entry into open streams or sewers; contain spill by diking;
vacuum up liquid or use absorbent media; remove to storage for disposal and rinse
residual stain with water.
7. HANDLING AND STORAGE
Handling : Keep out of reach of children. For personal protection see section 8.
Storage : Keep tightly closed.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye protection : Wear as appropriate:
safety glasses with side-shields
goggles