Technical Specifications

Ultra Gloss Sealer - Professional Grade
Ultra Gloss Sealer
Professional Grade
Revised: 03/08
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest Ultra Gloss Sealer is a 100% Water-Based
Acrylic Clear Sealer that provides a high gloss
protective and durable finish to paving stone and
exposed aggregate surfaces.
Uses
Paving Stone
Decorative Stone
Exposed Aggregate Concrete
Concrete
Coverage
130 to 170 square feet per gallon per coat.
Directions
Clean Surface - Sweep all dirt and loose debris
from surface. Remove all oil, grease and foreign
materials. Surface must be completely dry before
applying concrete sealer.
Applying
Stir pail thoroughly. Apply thin even coats of sealer
with a roller. Additional coats may be applied to
achieve desired level of gloss and finish. Allow
material to dry thoroughly between coats.
Important
Read entire label before using. Application
temperature must be a minimum of 60°F and
rising. Do not apply when temperature is expected
to drop below 60°F within a 24 hour period. Be
sure to wear eye protection, rubber gloves, long
pants, and long sleeves when mixing and applying
SealBest materials. In areas where dew or fog
accumulates in the early evening, it is best to coat
in the morning. Stop coating by early afternoon
(3:00 pm) to prevent wash off, which will occur if
dew, fog, or rain arrive before coating dries. Do
not apply if rain is imminent or forecast within 24
hours of application.
Clean Up
Wash tools with water before material dries.
Ingredients: Cas No.
Water 7732-18-5
Acrylic Water
Based Emulsion
Proprietary
www.homedriveway.com