User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Chapter 1: Introduction to EXPLORER 540
98-148232-B Features and interfaces of the EXPLORER 540 2
Features and interfaces of the EXPLORER 540
Features
M2M or standard class 2, depending on airtime subscription (SIM card)
Automatic installation function
Standard data up to 464/448 kbps (download/upload)
Remote management
SMS for remote management
Power save functions with various “wake on” methods (timer or input pin)
Software upgrade and file transfer over-the-air
Connectivity “watchdog” function (Link monitoring)
Automatic context activation
For the M2M version only:
• Inmarsat M2M Access Platform
• Access to Inmarsat FTP server for firmware upgrade
For the non-M2M version: only
• Streaming data rates of 32, 64 and 128 kbps
• Voice over IP (Standard voice 4 kbps AMBE+2 codec or Premium voice 3.1 kHz audio 64
kbps)
IP66 protection
Built-in web interface allowing you to manage connections and customize the terminal to
your specific needs, using a computer
Support for GPS, GLONASS and BeiDou navigation systems
Interfaces
LAN interface with Power over Ethernet (PoE) input
I/O ports for control of power save mode and for remote control/status
Power input from:
• PoE+ (IEEE 802.3at type 2 class 4, 25 W) or
• separate DC power source, e.g. a battery (max. range 10.5-32 VDC)