User Manual

Appendix B: Command reference
98-148232-B SMS remote commands 96
SMS remote command summary
Commands
The table below summarizes the available SMS remote commands. Empty cells means no
parameters and no placeholders (the password comes just after the last parameter).
Parameters
The table below summarizes the available parameters for the SMS remote commands.
Command Parm1 Parm2 Parm Parm Parm Parm Parm Password
ACTIVATE <qos> <PC/TE type> <apn> <user> <pwd> <rsms_pwd>
DEACTIVATE <qos> <PC/TE type> <rsms_pwd>
CLEAR <category> SMS <rsms_pwd>
GETINFO <info_mode> <dataset> <rsms_pwd>
RESTART <reset_type> BGAN <rsms_pwd>
WATCHDOG <wdog_op> <ping1> <ping2> <ping3> <ping_
always>
<ping_
interval>
<wdog_
enable>
<rsms_pwd>
ADPWRST 1 <imei> <rsms_pwd>
ATCO <resp_mode> <rsms_pwd> <at_cmd>
Parameter Values Meaning
<qos> 1 Standard/background data (currently the only qos available for M2M)
<PC/TE type> DHCP
STATIC
AWO
<name>
<IP addr>
ANY
All TEs known via DHCP
All TEs known via Terminal settings
Always On, deactivate all PDP contexts including context established with
ACA
Name of specific TE, as known by DHCP server
IP Address of specific TE (or Global IP for DEACTIVATE)
Any/all TEs attached (DEACTIVATE: all except PDP context established with
ACA)
<apn> <APN>
NA
APN name, e.g. bgan.inmarsat.com
Placeholder when no APN is specified. Default APN is used.
<user> <APN user name>
NA
User name associated with APN
Placeholder when no APN user name is specified
<pwd> <APN password>
NA
Password associated with APN username
Placeholder when no APN password is specified