User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Appendix B: Command reference
98-148232-B AT commands 100
M2M related AT commands
The tables below summarize some of the most used AT commands for M2M operation.
Parameters are explained in Parameters for other M2M related AT commands on page 104.
ATCO commands
The table below summarizes the ATCO commands, i.e. AT commands that can be used in the
SMS command ATCO.
Command Parm1 Parm2 Parm3 Parm4 Parm5 Parm6 Parm7 Parm8 Parm9
_IGETFW
<mode> [<ftp
server>]
[<ftp
uname>]
[<ftp
passwd
>]
[<apn>] [<apn
uname>]
[<apn
passwd>]
_IUPDFW
<filename>
_ISENDFILE
<local dir> <filena
me>
<ftp dir> <ftp
server>
<ftp
uname>
<ftp
passwd>
[<apn>] [<apn
uname>]
[<apn
passwd>]
_IGETFILE
<ftp dir> <filena
me>
<local
dir>
<ftp
server>
<ftp
uname>
<ftp
passwd>
[<apn>] [<apn
uname>]
[<apn
passwd>]
_IUPDCFG
<filename>
_IREMWEB
<enable> <ip_ad
dr_lo>
[<ip_addr
_hi>]
[<apn>] [<apn
uname>
]
[<apn
passwd>
]
_IATCROBST
a
a. Robustness for 3GPP LTE signals, not ATC
<enable>
_ICPWD
<type> <old
passwd
>
<new
passwd>