User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Appendix B: Command reference
98-148232-B AT commands 101
Parameters for ATCO commands
Parameter Values Meaning
<mode> 0
1
Deferred activation
Immediate activation
<ftp server> <ftp server>
NA
Host name or IP address of the ftp server
Placeholder when no ftp server is specified. Default ftp server is used.
<ftp uname> <ftp uname>
NA
User name for the ftp server
Placeholder when no ftp server is specified
<ftp passwd> <ftp passwd>
NA
Password for the ftp server
Placeholder when no ftp server is specified
<apn> <apn>
NA
APN name
Placeholder when no APN is specified. The default APN from the SIM is used.
<apn uname> <apn uname>
NA
User name for the APN
Placeholder when no APN is specified
<apn passwd> <apn passwd>
NA
Password for the APN
Placeholder when no APN is specified
<filename> <filename> The name of the file to use, including extension
<local dir> <local dir> The name of the local directory in the EXPLORER 540 to use for getting or
saving a file
<ftp dir> <ftp dir> The name of the directory on the ftp server to use for getting or saving a file
<enable> 0
1
Disable
Enable
<ip_addr_lo> <ip_addr_lo> IP address of the HTTP client that should be allowed remote access to the
EXPLORER 540,
or, the lowest address in a range of IP addresses, if a range of addresses is
allowed.
<ip_addr_hi> <ip_addr_hi> The upper IP address of a range of allowed IP addresses. This parameter is
optional; if omitted, only the specified single IP address <ip_addr_lo> may
access the EXPLORER 540.
<type> AD
RS
The type of password is administrator password
The type of password is remote SMS password
<old passwd> <old passwd> The old password that is already in the system
<new passwd> <new passwd> The new password to be used after this command. Note that quotes (“) and
commas (,) and spaces ( ) are not allowed.