User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Appendix B: Command reference
98-148232-B AT commands 105
Context management AT commands
The table below summarize some of the most used AT commands for context management.
Parameters are explained in the table in the next section.
Parameters for context management AT commands
The table below summarizes the available parameters for the AT commands for context
management.
Command Parm1 Parm2 Parm3 Parm4 Parm5 Parm6 Parm7
+CGDCONT <cid> <protocol> <apn> <apn
uname>
<apn_passwd>
+CGEQREQ <cid> <Traffic
Class>
<Max bitrate
UL>
<Max
bitrate DL>
<Guaranteed
bitrate UL>
<Guaranteed
bitrate DL>
+CGEQMIN <cid> <Traffic
Class>
<Max bitrate
UL>
<Max
bitrate DL>
<Guaranteed
bitrate UL>
<Guaranteed
bitrate DL>
+CGTFT <cid> <packet
filter
identifier>
<evaluation
precedence
index>
<source
addr &
subnet>
<protocol
number>
<destination
port range>
<source
port range>
+CGDSCONT <cid> <p_cid>
+CGACT <state> <cid>
+CGPADDR <cid>
Parameter Values Meaning
<cid> <cid> The Context Identifier (1 – 11) for the PDP context
<protocol> <protocol> The transport protocol (IP or PPP)
<apn> <apn>
NA
APN name
Placeholder when no APN is specified. The default APN from the SIM is used.
<apn uname> <apn uname>
NA
User name for the APN
Placeholder when no APN is specified
<apn passwd> <apn passwd>
NA
Password for the APN
Placeholder when no APN is specified
<Traffic Class> 1
3
Streaming (not available for M2M subscription)
Standard data (Background)
<Max bitrate
UL>
<Max bitrate UL>
NA
The maximum bit rate up link (32, 64, 128)
Placeholder when Standard data is selected
<Max bitrate
DL>
<Max bitrate DL>
NA
The maximum bit rate down link (32, 64, 128)
Placeholder when Standard data is selected