User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Appendix B: Command reference
98-148232-B AT commands 107
Message (SMS) configuration AT commands
The following AT commands are used for configuration of SMS.
Note
For details on parameters for the message configuration commands, see the 3GPP
standard ETSI TS 127 005 V4.2.1.
Command Parm1 Parm2 Parm3 Parm4 Function
+CSMS <service>
Select Message Service
+CPMS <mem1> [<mem2> [<mem3>]
]
Preferred Message Storage
+CMGF <mode>
Message Format
+CSCA <sca> [<tosca>]
Service Center Address
+CSMP [<fo> [<vp> [<pid> [<dcs>]]]
]
Set Text Mode Parameters
+CSDH <show>
Show Text Mode Parameters
+CNMI [<mode> [<mt> [<bm> [<ds>]]]]
New Message Indications to TE
+CMGL <stat>
List Messages
+CMGR <index>
Read Messages
+CMGS <da/mr> [<toda/scts
>]
Send Message
+CMGD <index>
Delete Message