User Manual

Chapter C: BGAN non-M2M functions
98-148232-B To control data connections from web interface (BGAN) 109
If the connection fails, the connection tile shows an exclamation mark  and an error
message. The error message is also shown in the data log, see Data log on page 48.
When a connection is active, the icon changes to
 and the tile for the active connection
shows:
• IP address: The IP address that has been assigned by the service provider to this session.
• Transferred data: For Standard data, the tile shows the total amount of transmitted and
received data since the connection was established.
• Connection duration: For Streaming data, the tile shows the total time the connection has
been active.
• Bit rate: For Streaming connections, the tile shows the fixed bit rate.
Default data connection types
By default, the following connections are available:
You can use these connections as they are or build your own connection packages. For set up
of the connection packages, see the next section.
Name Type of connection
Standard data Several users can share the data connection. This type
of connection is ideal for TCP/IP traffic such as e-mail,
file transfer, and Internet/intranet access.
The user pays for the amount of data sent and
received.
Streaming data
The following Streaming classes are
available:
32, 64, or 128 Streaming
An exclusive, high-priority connection, ensuring
seamless transfer of data. This type of connection is
ideal for time critical applications like live video over
IP.
The user pays for the duration of the connection.
Note that Streaming is not available in M2M
subscriptions.