User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Appendix C: BGAN non-M2M functions
98-148232-B To make phone calls over BGAN (not M2M version) 111
5. Click Save package.
The new package should now appear as a new tile on the startup page.
For details on Parameters (APN and IP Header compression) see To change the APN for a
connection package on page 43.
To make phone calls over BGAN (not M2M version)
To connect a VoIP phone or smartphone
Your VoIP phone or smartphone can be set up to make and receive calls over the BGAN
network, using the terminal’s phone number.
To connect your phone for making calls
For details on initial setup of your VoIP phone and the EXPLORER 540, see
• The documentation for your handset
• First time SIP setup on page 112
• To manage VoIP phones or smartphones on page 114
To connect a VoIP phone, do as follows:
1. Start up the EXPLORER 540 terminal.
2. Connect your phone via a router/switch to the LAN interface on the EXPLORER 540
1
.
When the VoIP phone is powered and ready, you are able to make and receive calls over BGAN.
Note
Phone calls are only possible if:
• The EXPLORER 540 is connected to the BGAN satellite network, and
• The airtime subscription is a class 2 subscription (not M2M)
Note
Make sure your VoIP phone has an integrated SIP client. The EXPLORER 540 has an
integrated SIP server.
1. Since there is only the one LAN interface and the EXPLORER 540 cannot provide power, you must
connect the phone(s) via external equipment such as a router (wired or wireless) or a switch.