User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Chapter 2: To get started
98-148232-B SIM card 8
What’s in the delivery
The following items are included in the delivery:
•EXPLORER540 terminal
•Pole mount kit
• 2 Cable glands and 1 Blind plug
• Torx bit for mounting/dismounting the cover for the interface enclosure
• Installation guide
SIM card
The SIM card determines whether the terminal operates as an M2M terminal or a standard
BGAN class 2 terminal.
You insert the SIM card before installing the EXPLORER 540. The picture below shows the
location of the SIM card holder, in the interface enclosure at the back of the terminal.
For details on how to insert the SIM card, see the installation guide.
Important
Do not insert or remove the SIM card while the EXPLORER 540 is powered!