User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Chapter 4: Configuration with web interface
98-148232-B The web interface 39
The web interface
What is the web interface?
The web interface is built into the terminal and is used for operating, setting up and configuring
the system.
You can access the web interface from a computer with a standard Internet browser.
To access and navigate the web interface
To access the web interface
To access the web interface, do as follows:
1. Start up the terminal.
2. Connect your computer to the terminal.
You can connect locally to the LAN interface or use a remote connection. See Remote
access to the web interface on page 25.
3. Open your browser and enter the IP address of the terminal in the address bar.
For local connection, the default IP address of the terminal is 192.168.0.1.
For remote connection, see Remote access to the web interface on page 25.
4. Enter user name and password. You can log in as user or as administrator.
• Default for user: User id = user, Password = <serial number of the EXPLORER 540>
• Default for admin: User id = administrator, Password = admin
If the installation process is ongoing, the web interface will show a popup window with the
progress of the installation process.
You can change the language to French, German, Russian, Spanish, Chinese or Japanese.
See To select the language on page 52.
Note
If the same user enters a wrong password 5 times in a row, he is locked out for 15
minutes (other users can still access the login page). After 15 minutes he can try
again.
Note
Some parts of the web interface may not be accessible if the user permissions are
limited. For information on how to set up user permissions, see To set up user
permissions on page 63.