User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Chapter 4: Configuration with web interface
98-148232-B To manage connected devices (Traffic control) 55
3. At Name, type in the name you want for your device.
4. Click Save.
Traffic control (administrator)
When you are logged in as administrator, the Traffic control setup offers more options. To set
up traffic control as administrator, do as follows:
1. Log in as administrator.
2. In the Control panel
, click Traffic control.
A list of connected and added devices appears.
3. Click the Enable button to enable Traffic control.
By default Traffic control is disabled, which means all devices are allowed access.
To change the default settings for all devices
1. Click the button Default settings.
2. Select Block BGAN traffic if you want to deny access to BGAN network for all devices.
With this option selected, only the administrator will be able to allow access for selected or
all devices.
3. Click Save.
All devices in the list will now have the new default settings.
Important
All devices in the list are updated with the default settings when you click Save.