User Manual

Chapter 5: Maintenance and troubleshooting
98-148232-B Troubleshooting 82
Status indicator
Event messages and status messages
In the web interface of the EXPLORER 540 you can see status messages and alerts that are
currently active.
When a warning or error event is active, the web interface shows a warning symbol
. Select
it to see a list of currently active alerts.
List of messages
The following list explains some of the messages that may show in the web interface of the
EXPLORER 540.
Indicator pattern Meaning
Green flashing rapidly Starting up
Yellow flashing BGAN pointing
Green flashing Verify network connectivity
Green constant Ready
Yellow flashing rapidly Closing down
Yellow constant Warning (user recoverable). See web interface for the warning text.
Red constant Error. See the web interface.
Blue flashing Uploading software to the terminal
Note: The indicator will only flash blue if software upgrade is done
before installation. After installation the indicator is disabled.
Off Power off or light indicator has been disabled
Displayed text Explanation Remedy
Standard data speed
limited due to high
temperature
The bit rate of the data
channel is reduced because
the temperature is too high.
None
Connection closed.
Data or time limit
exceeded.
The data connection is closed
because a data limit defined
in the web interface is
exceeded.
The data limit may be set to
avoid unintentional use of
bandwidth, e.g. if you forget
to close a connection after
use.
Restart the connection e.g.
from the Dashboard in the
web interface. See Manual
activation of data
connections on page 29.
You can change the data
limits in the web interface
under Advanced > Data
limits.