User Manual
Table Of Contents
- Safety summary
- Antenna safety instructions
- About this manual
- Introduction to EXPLORER 540
- To get started
- Operation
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages (BGAN M2M)
- Status information
- The Control panel
- To restart the installation process
- To use the logs
- Terminal settings
- Port forwarding
- To manage connected devices (Traffic control)
- To set up tracking
- Support features
- Advanced settings
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Technical specifications
- Command reference
- BGAN non-M2M functions
- Conformity
- Glossary
- Index
Chapter 5: Maintenance and troubleshooting
98-148232-B List of reserved IP subnets 88
List of reserved IP subnets
Some IP subnets are reserved for internal use in the terminal. If any of these addresses are
assigned to external equipment connected to the terminal, the terminal and connected
equipment will not be able to communicate.
The following local IP subnets are reserved for internal use in the terminal. The netmask for all
of these subnets is 255.255.255.0.
192.168.1.x
192.168.2.x
192.168.3.x
192.168.4.x
192.168.5.x
192.168.6.x
192.168.7.x
192.168.8.x
192.168.9.x
192.168.10.x
192.168.11.x
192.168.12.x
192.168.13.x
(“x” means all numbers from 0 to 255)