User's Manual
Table Of Contents
- Safety summary
- Preface
- Training information
- About this manual
- Introduction
- Installation
- Interface description
- Configuration
- Service & maintenance
- Technical specifications
- NMEA sentences
- B.1 NMEA sentences used
- B.2 Sentence use reference
- B.2.1 ABK - AIS addressed and binary broadcast acknowledgement (output)
- B.2.2 ABM - AIS addressed binary and safety related message (input)
- B.2.3 ACA - AIS channel assignment message (input / output)
- B.2.4 ACK - Acknowledge alarm (input)
- B.2.5 AIR - AIS interrogation request (input)
- B.2.6 ALR - Set alarm state (output)
- B.2.7 BBM - AIS broadcast binary message (input)
- B.2.8 DTM - Datum reference (input)
- B.2.9 EPV - Command or report equipment property value (input / response output)
- B.2.10 GBS - GNSS satellite fault detection (input)
- B.2.11 GGA - Global positioning system (GPS) fix data (input)
- B.2.12 GNS - Fix data (input)
- B.2.13 HBT - Heartbeat supervision sentence (input)
- B.2.14 HDT - Heading true (input)
- B.2.15 LR1 - AIS long-range reply sentence 1 (output)
- B.2.16 LR2 - AIS long-range reply sentence 2 (output)
- B.2.17 LR3 - AIS long-range reply sentence 3 (output)
- B.2.18 LRF - AIS long-range function (input / output)
- B.2.19 LRI - AIS long-range interrogation (input / output)
- B.2.20 NAK - Negative acknowledgement (output)
- B.2.21 PTHRAOC - AIS operational control (input / output)
- B.2.22 PTHRROS - Radio operational status (output)
- B.2.23 RMC - Recommended minimum specific GNSS data (input)
- B.2.24 ROT - Rate of turn (input)
- B.2.25 SPW - Security password sentence (input)
- B.2.26 SSD - AIS ship static data (input / output)
- B.2.27 THS -True heading and status (input)
- B.2.28 TRL - AIS transmitter non functioning log (output)
- B.2.29 TXT - Text transmission (output)
- B.2.30 VBW - Dual ground/water speed (input)
- B.2.31 VDM - AIS VHF data-link message (output)
- B.2.32 VDO - AIS VHF data-link own-vessel report (output)
- B.2.33 VER - Version (output)
- B.2.34 VSD - AIS voyage static data (input / output)
- B.2.35 VTG - Course over ground and ground speed (input)
- B.2.36 ZDA - Time and Date (output)
- Supported keys
- Glossary
- Index
Sentence use reference
98-137573-A Appendix B: NMEA sentences B-13
BBBB
NMEA sentences
B.2.26 SSD - AIS ship static data (input / output)
$--SSD,c-c,c-c,xxx,xxx,xx,xx,c,ac*hh<CR><LF>
B.2.27 THS -True heading and status (input)
$--THS,x.x,a*hh<CR><LF>
B.2.28 TRL - AIS transmitter non functioning log (output)
$--TRL,x.x,x.x,x,xxxxxxxx,hhmmss.ss,xxxxxxxx,hhmmss.ss,x,*hh<CR><LF>
Field Data format Description Comment
1 SSD Sentence Id Used
2 c-c Ship’s call sign Used
3 c-c Ship’s name Used
4 xxx Pos. ref., point dist. A from bow Used
5 xxx Pos. ref., point dist. B from stern Used
6 xx Pos. ref., point dist. C from port beam Used
7 xx Pos. ref., point dist. D from starboard beam Used
8 c DTE indicator flag Used
9 ac Source identifier Used
Field Data format Description Comment
1 THS Sentence Id Used
2 x.x Heading, degrees true Used
3 a Mode indicator Used
Field Data format Description Comment
1 TRL Sentence Id Used
2 x.x Total number of log entries Used
3 x.x Log entry number Used
4 x Sequential message identifier Used
5 xxxxxxxx Switch off date Used
6 hhmmss.ss Switch off UTC time Used
7 xxxxxxxx Switch on date Used
8 hhmmss.ss Switch on UTC time Used
9 x Reason code Used