User's Manual
Table Of Contents
- Safety summary
- Preface
- Training information
- About this manual
- Introduction
- Installation
- Interface description
- Configuration
- Service & maintenance
- Technical specifications
- NMEA sentences
- B.1 NMEA sentences used
- B.2 Sentence use reference
- B.2.1 ABK - AIS addressed and binary broadcast acknowledgement (output)
- B.2.2 ABM - AIS addressed binary and safety related message (input)
- B.2.3 ACA - AIS channel assignment message (input / output)
- B.2.4 ACK - Acknowledge alarm (input)
- B.2.5 AIR - AIS interrogation request (input)
- B.2.6 ALR - Set alarm state (output)
- B.2.7 BBM - AIS broadcast binary message (input)
- B.2.8 DTM - Datum reference (input)
- B.2.9 EPV - Command or report equipment property value (input / response output)
- B.2.10 GBS - GNSS satellite fault detection (input)
- B.2.11 GGA - Global positioning system (GPS) fix data (input)
- B.2.12 GNS - Fix data (input)
- B.2.13 HBT - Heartbeat supervision sentence (input)
- B.2.14 HDT - Heading true (input)
- B.2.15 LR1 - AIS long-range reply sentence 1 (output)
- B.2.16 LR2 - AIS long-range reply sentence 2 (output)
- B.2.17 LR3 - AIS long-range reply sentence 3 (output)
- B.2.18 LRF - AIS long-range function (input / output)
- B.2.19 LRI - AIS long-range interrogation (input / output)
- B.2.20 NAK - Negative acknowledgement (output)
- B.2.21 PTHRAOC - AIS operational control (input / output)
- B.2.22 PTHRROS - Radio operational status (output)
- B.2.23 RMC - Recommended minimum specific GNSS data (input)
- B.2.24 ROT - Rate of turn (input)
- B.2.25 SPW - Security password sentence (input)
- B.2.26 SSD - AIS ship static data (input / output)
- B.2.27 THS -True heading and status (input)
- B.2.28 TRL - AIS transmitter non functioning log (output)
- B.2.29 TXT - Text transmission (output)
- B.2.30 VBW - Dual ground/water speed (input)
- B.2.31 VDM - AIS VHF data-link message (output)
- B.2.32 VDO - AIS VHF data-link own-vessel report (output)
- B.2.33 VER - Version (output)
- B.2.34 VSD - AIS voyage static data (input / output)
- B.2.35 VTG - Course over ground and ground speed (input)
- B.2.36 ZDA - Time and Date (output)
- Supported keys
- Glossary
- Index
Alarms and notifications
98-137573-A Chapter 6: Service & maintenance 6-9
6666
Service & maintenance
No valid
SOG
information
(ID 029)
The SAILOR
6282 AIS
Transponder
continues
operation using
default data.
This alarm is activated
when none of the sensor
inputs reports a valid
speed over ground (SOG).
Check the NMEA
connection
between speed
measuring device
and AIS
Transponder; check
the GNSS antenna,
plugs, and cable to
the AIS
Transponder; check
the NMEA
connection
between the
external GNSS
receiver and the
AIS Transponder.
No valid
COG
information
(ID 030)
The SAILOR
6282 AIS
Transponder
continues
operation using
default data.
This alarm is activated
when none of the sensor
inputs reports a valid
course over ground (COG).
In order to solve
the problem, check
the GNSS antenna,
plugs, and cable to
the AIS
Transponder; check
the NMEA
connection
between the
external GNSS
receiver and the
AIS Transponder.
Heading
lost/invalid
(ID 032)
The SAILOR
6282 AIS
Transponder
continues
operation using
default data.
This alarm is activated
when none of the sensor
inputs reports a valid
heading.
Check the NMEA
connection
between heading
sensor and the AIS
Transponder.
Alarm Consequence Reason Remedy
Table 6-1: AIS Alarms (Continued)