User Manual
Table Of Contents
- Safety summary
- Preface
- Training information (for FCC approved equipment)
- Introduction
- Operation
- Overview
- General use and navigation
- Power on, speaker volume and antenna tuning
- SSB, AM BROADCAST, DSC or TELEX mode
- Radio settings and ITU channel selection
- Entering Rx and Tx frequencies
- Adjusting RF gain
- Soft-key functions
- Position and MMSI Information
- Channel information always available in the display
- Engagement status
- Speaker devices
- Changing the display colors and dim function
- Squelch on/off (soft key)
- Basic MF/HF radio communication
- Watch function
- DSC calls
- Phone book
- Radiotelex
- Replay function
- Setup
- Service & maintenance
- Glossary
- Index
vii
Preface 2
Radio for occupational use
The SAILOR 6300 MF/HF DSC fulfils the requirements of the EC
directive 1999/5/EC, Radio and Telecommunications Terminal
Equipment and is intended for use in maritime environment.
SAILOR 6300 MF/HF DSC is designed for occupational use only and
must be operated by licensed personnel only.
SAILOR 6300 MF/HF DSC is not intended for use in an uncontrolled
environment by general public.
Manual overview
This manual has the following chapters:
• Introduction contains a description of the MF/HF radio and its
components.
• Operation explains how to start up the radio, make and receive
voice, Distress and DSC calls, including how to handle multiple
sessions, Watch and Replay.
• Service & maintenance contains support information including
a weekly check and a troubleshooting guide.