Installation Manual
Table Of Contents
- Safety summary
- About This Manual
- Introduction
- Installation
- Maintenance
- Illustrated parts list
- Equipment specifications
- References
- Glossary
- Index
Unpacking & initial inspection
3-2 Chapter 3: Installation 98-152675-A
Cobham Public
3.3 Unpacking & initial inspection
Inspect the shipping container immediately upon receipt for evidence of damage during
transport. If the shipping container is severely damaged or water stained, request that the
carrier's agent be present when opening the carton.
Unpack and check that the following items are present:
•LGA-5005
• Mounting hole sealing kit
After unpacking the LGA-5005, inspect it thoroughly for hidden damage and loose
components or fittings. If the contents are incomplete or there is mechanical damage or
defect, notify your supplier.
Verify the following during unpacking of the unit:
• The connector has a protective cap fitted.
Retain the protective connector cap, packing material and containers for future storage
and/or shipping use.
Note
The sealing kit contains 6 sealing caps and air displacers (two are spares)
Figure 3-1: Mounting hole sealing kit