User Manual

Factory (FOR INTERNAL USE)
99-137719-D Confidential - For internal use 6-67
6666
Startup & configuration
6.11.1.2 Tx gain versus temperature
The following shows the parameters used for Tx gain calibration versus temperature.
To get a successful result the following must apply:
6.11.1.3 Tx gain versus frequency
The following shows the parameters used for Tx gain calibration versus frequency.
To get a successful result the following must apply:
Parameter name
sys.bgan.cal
External
access
Type /
Domain
Values
[min;max]
Comment
.tx.gain.temp.locked r/w t1 §1 int / ram [0..1] Lock mechanism
.tx.gain.temp.thres[1..10] r/w t1 §1 int / factory [-100..150] Temp [°C] threshold
.tx.gain.temp.pwr_correction[1..10] r/w t1 §1 int / factory [-500..500] Power corr. 0.01 dB
.tx.gain.temp.pwr_pairs r/w t1 §1 int / factory [0..10] Number of
temperature pairs.
Table 6-81: Gain versus temperature, can be configured
temp
thres1
temp
thres2
 temp
thres10
Parameter name
sys.bgan.cal
External
access
Type /
Domain
Values
[min;max]
Comment
.tx.gain.freq.locked r/w t1 §1 int / ram [0, 1] Lock mechanism
.tx.gain.freq.thres[1..10] r/w t1 §1 int /
factory
[1500000000..
1700000000]
GHz
L-band freq. [Hz]
.tx.gain.freq.pwr_correction[1..10] r/w t1 §1 int /
factory
[-500..500] Power corr. 0.01
dB
.tx.gain.freq.pwr_pairs r/w t1 §1 int /
factory
[0..10] Number of Power
pairs.
Table 6-82: Configuration parameters: Tx gain versus frequency
freq
thres1
freq
thres2
 freq
thres10