User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
23 of 105
Revision:
B
COM
CC:
1
(T: 99-161853-F)
4 SERVICE ACTIVATION
In order to access the INMARSAT SB-S/SBB Network, an active service agreement is required between the
aircraft owner/operator and a Communication Service Provider (CSP):
SwiftBroadband-Safety (SB-S) | Flight Deck Services:
o Primary
ARINC DIRECT
https://www.arincdirect.com
SITA
https://www.sita.aero
o Regional
China Transport Telecommunications & Information Centre (CTTIC)
SwiftBroadband (SBB) | Passenger Services
o Primary
ARINC DIRECT
https://www.arincdirect.com
SITA
https://www.sita.aero
o Regional
China Transport Telecommunications & Information Centre (CTTIC)
The CSP and the appointed Airline Designator/Device Sponsor (See section 4.2) will require the following
information during the activation process:
AVIATOR S Information
o System Type
AVIATOR 200S (Class 4) or
AVIATOR 700S (Class 6).
o SIM Card Information
International Mobile Subscriber Identity (IMSI)
IMSI 0 is for Cockpit Voice and Data | ACD + AISD
IMSI 1 is for Cabin Data | PIESD
IMSI 2 is reserved for future use
IMSI 3 is reserved for future use
o Smart Card Information
The smart card serial number for the PKI Security Certificate | ACD
Aircraft or Owner Information
o International Civil Aviation Organization (ICAO) Address
o Registered Aircraft Identity | Tail Number
o Billing information
As an outcome of the activation process, the CSP must provide the permitted Access Point Name (APN) for
the AVIATOR S EFB (AISD) and Cabin Data
7
(PIESD) connections. The APN provided by the CSP must be
configured in the User ORT (refer to section 3.2.3).
7
Applicable only to AVIATOR 700S configuration.