User's Manual

COBHAM PRIVATE
(T: 99-161853-F)
7.1.1.2 Directory Dial
NOTE: The directory group names and entries are User ORT configurable and may differ from the examples.
1. From the SATCOM MAIN MENU, press LSK-R6 to enter the SATCOM DIRECTORY page.
2. Press the LSK matching the group name to be displayed.
a. For example, press LSK-L3 to access the NON-SAFETY group.
3. Browse the directory using the “page up” and “page down” buttons to display the various pages of
the directory.
a. The current page / total page count may be shown in the top right corner of the display.
b. To sort the directory alphabetically, press SORT (LSK-R4).
c. To search the directory for a specific entry, enter the first three letters in the scratchpad and
press FIND (LSK-R5).
d. The current audio channel is displayed at LSK-R1. To modify, enter the desired audio channel
number (1/2) in the scratchpad and press LSK-R1.
i. The default channel for MCDU#1 is audio channel 1.
ii. The default channel for MCDU#2 is audio channel 2.
iii. The default channel for MCDU#3 (if enabled by Secure ORT) is audio channel 1.
4. Once the desired entry is displayed on the screen and the audio channel has been selected, press the
LSK matching the entry.
a. For example, press LSK-L3 to pre-select the third entry in the list.
Refer to section 7.1.1.3 for guidance on dialling/initiating the call.
Figure 7-3: MCDU - SATCOM Directory
Figure 7-4: MCDU - SATCOM Directory Entries