User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
41 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
7.1.2.4 Ending an Incoming Call
Calls may be ended (terminated) by either the calling party (ground side) or the called party (airborne side).
In both cases, the airborne side (the crew) must:
1. Release the call by pressing the associated audio channel (SAT 1/2) call button on the ACP, else the
channel will remain active/engaged and may prevent incoming calls from alerting the crew.
- The ACP SAT call button flashes green while the call termination is in progress (Figure 7-19).
- Call ended side tone may be heard by the crew.
- Within 3 seconds, the flashing will stop and the call will be ended (Figure 7-12).
- The SATCOM MAIN MENU SAT 1/2 status will return to “READY TO CONNECT” once the channel
has been released (Figure 7-13).
Figure 7-18: ACP - Ending a call
Figure 7-19: ACP - Call terminating - Flashing
amber
Figure 7-20: ACP - No active calls Figure 7-21: MCDU - SATCOM Main Menu -
Channel released