User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
51 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
9 NON-SAFETY DATA SERVICES
9.1 ELECTRONIC FLIGHT BAG (EFB) CONNECTIVITY
The AVIATOR S Airline Information and Services Domain (AISD) provides a routed Ethernet interface with
access to a Background Class connection that is managed by the Aircraft Control Domain (ACD).
When enabled by Secure ORT (see section 3.2.3), this Ethernet interface provides segregated data capability
to the cockpit for EFB applications.
ACD Voice and data traffic has a higher priority than AISD data traffic, ensuring that all SB-S functions are
not impacted by AISD data requests.
The AISD/EFB data connection availability is linked to the ACD connectivity state:
 When the AVIATOR S ACD is “logged on” the AISD data connection will be active.
 Similarly, when the AVIATOR S ACD is “logged off” the AISD data connection will be inactive.
Refer to section 6.1.1 for further guidance regarding logging off/on.
The AISD/EFB Ethernet interface provides read only access to a Simple Network Management Protocol
(SNMP) for retrieving AVIATOR S system and operational status information as well as link status and
history. Refer to Appendix A for the list of available Object Identifiers (OID’s).
9.2 CABIN DATA CONNECTIVITY
The cabin data connection, connected to the AVIATOR S Passenger Information and Entertainment Services
Domain (PIESD) Ethernet port, segregates PIESD (cabin) data traffic from all other data streams through a
separate channel card, only available in the AVIATOR 700S system configuration.
The Cabin Data connection availability is however linked to the ACD connectivity state:
 When the AVIATOR S ACD is “logged on” the PIESD data connection will be active.
 Similarly, when the AVIATOR S ACD is “logged off” the PIESD data connection will be inactive.
Refer to section 6.1.1 for further guidance regarding logging off/on.
Additionally, cabin audio communication can be enabled/disabled through the SATCOM CONFIG page by:
MCDU: Pressing LSK-R3 to toggle the Cabin Calls state (Figure 9-1 & Figure 9-2)
19
.
RMP: Pressing LSK-R2 to toggle the Cabin Calls state (Figure 9-3 & Figure 9-4)
19
.
The PIESD Ethernet interface provides read only access to a Simple Network Management Protocol (SNMP)
for retrieving AVIATOR S system and operational status information as well as link status and history. Refer
to Appendix B for the list of available Object Identifiers (OID’s).
19
Cabin Call enable/disable functionality is only visible in the AVIATOR-700S system configuration when PIESD
is enabled by Secure ORT configuration.