User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
66 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
.asliSatIDNum(3)
Unique numeric identifier for the connected
satellite: 3 (MEAS)
6 (EMEA)
5 (APAC)
7 (AMER)
Integer [0..63]
.asliActLinkEntryNumbers(4)
Indicates the number of the entries in the first
table and has a range from 0 to 50.
Integer [0..50]
.asliActLinkTable(5)
.asliActLinkIndex(1)
This object is a unique identifier for the current
link entry and can be considered a handle for the
session.
With each new link, this number is to be
incremented by one, wrapping around (but
avoiding conflicts).
Integer [1..32767]
.asliActLinkReleaseType(2)
This object shows the release type of the current
link as numeric codes as described in [A781]
Attachment 5, Section 6.
Integer [1..32767]
.asliActLinkReleaseReason(3)
Variable string based on asliActLinkReleaseType
String [0..128]
.asliActLinkStatus(4)
This object shows if the current link is up or not.
Because entries are only removed 30 seconds
after going down, it is important to check this
field while reading the active link table.
.asliActLinkChanNo(5)
This object shows which channel is being used by
the current link:
Integer = 2 (PIESD)
.asliActLinkContextID(6)
Virtual context ID specific to that user session
(tied to a primary PDP).
Integer [0..255]
.asliActLinkActualContextID(7)
The NSAPI used over the air. This ID is unique
per channel card in the system while it is active.