User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
73 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
For the “ No SATCOM ” fault group the following fault bits are defined:
 DegradedNoSATCOM (Bit 0)
 DegradedPosLost (Bit 1)
 DegradedNO_ORT (Bit 2)
For the “ External Interface Failed ” fault group the following fault bits are defined:
 DegradedNo615-3 (Bit 0)
 Degraded615-3Lost (Bit 1)
 DegradedCMULost (Bit 2)
 DegradedMCDULost (Bit 3)
 DegradedCFDSLost (Bit 4)
 DegradedFWSLost (Bit 5)
 DegradedMCDUFailure (Bit 6)
For the “ No ACARS ” fault group the following fault bits are defined:
 DegradedNoACARS (Bit 0)
For the “ No Cockpit Voice ” fault group the following fault bits are defined:
 DegradedCockpitVoiceFailure (Bit 0)
For the “ No Cockpit Data ” fault group the following fault bits are defined:
 DegradedAISDNotWorking (Bit 0)
 DegradedAISDFailure (Bit 1)
 DegradedNoCockpitData (Bit 2)
For the “ No Cabin Data ” fault group the following fault bits are defined:
 DegradedPIESDNotWorking (Bit 0)
 DegradedCabinRMNotWorking (Bit 1)
 DegradedCabinRMFailure (Bit 2)
 DegradedPIESDFailure (Bit 3)
 DegradedCabinDataFailure (Bit 4)
As an example:
If the CMU and MCDU are lost, it will set the fault bits “2” and “3” in the “External Interface Failed” fault group
to combine into failure code “400C”.
asuSduInfoFailureReason is a failure message equal to the failure code in asuSduInfoFailureCode(11).