User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
80 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
Defined Values:
<cid>
a numeric parameter which specifies a particular PDP context definition (see+CGDCONT and +CGDSCONT
commands).
The following parameters are defined in 3GPP TS 23.107 -
<Traffic class>
a numeric parameter that indicates the type of application for which the UMTS bearer service is optimised.
0 conversational
1 streaming
2 interactive
3 background
4 subscribed value
Other values are reserved.
<Maximum bitrate UL>
a numeric parameter that indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a
SAP. As an example a bitrate of 32kbit/s would be specified as '32' (e.g. AT+CGEQREQ=…,32, …).
<Maximum bitrate DL>
a numeric parameter that indicates the maximum number of kbits/s delivered by UMTS (down-link traffic)
at a SAP. As an example a bitrate of 32kbit/s would be specified as '32' (e.g. AT+CGEQREQ=…,32, …). If
the parameter is set to '0' the subscribed value will be requested.
<Guaranteed bitrate UL>
a numeric parameter that indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at
a SAP (provided that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as
'32' (e.g. AT+CGEQREQ=…,32, …). If the parameter is set to '0' the subscribed value will be requested.
<Guaranteed bitrate DL>
a numeric parameter that indicates the guaranteed number of kbits/s delivered by UMTS (down-link
traffic) at a SAP (provided that there is data to deliver). As an example a bitrate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQREQ=…,32, …). If the parameter is set to '0' the subscribed value will be
requested.