User's Manual

AVIATOR 200S/700S
User Manual
COBHAM PRIVATE
Document:
98-158752
Page:
85 of 105
Revision:
B
Level:
COM
CC:
1
(T: 99-161853-F)
<Delivery order>
a numeric parameter that indicates whether the UMTS bearer shall provide in- sequence SDU delivery or
not.
0 no
1 yes
2 subscribed value.
Other values are reserved.
<Maximum SDU size>
a numeric parameter (1,2,3,…) that indicates the maximum allowed SDU size in octets. If the parameter is
set to '0' the subscribed value will be requested.
<SDU error ratio>
a string parameter that indicates the target value for the fraction of SDUs lost or detected as erroneous.
SDU error ratio is defined only for conforming traffic. The value is specified as 'mEe'. As an example a
target SDU error ratio of 5o10-3 would be specified as '5E3' (e.g. AT+CGQREQ=…,"5E3",…).
'0E0' means subscribed value.
<Residual bit error ratio>
a string parameter that indicates the target value for the undetected bit error ratio in the delivered SDUs.
If no error detection is requested, Residual bit error ratio indicates the bit error ratio in the delivered
SDUs. The value is specified as 'mEe'. As an example a target residual bit error ratio of 5o10-3 would be
specified as '5E3' (e.g. AT+CGQREQ=…,"5E3",…). '0E0' means subscribed value.
<Delivery of erroneous SDUs>
a numeric parameter that indicates whether SDUs detected as erroneous shall be delivered or not.
0 no
1 yes
2 no detect
3 subscribed value
Other values are reserved.