User's Manual
Table Of Contents
- Safety Summary
- Antenna Safety Instructions
- About the Manual
- Introduction
- Getting started
- Using the display and keypad
- Using the interfaces
- In this chapter
- General
- Bluetooth pairing
- Using a phone or fax machine
- Selecting the call type
- Connecting an analog phone or a fax machine
- Connecting an ISDN phone or a G4 fax machine
- Connecting a Bluetooth handset
- Entering the SIM PIN using a phone
- Making or receiving a phone call with the EXPLORER™ 700
- Making a call to the EXPLORER™ 700
- Dialing functions
- Sending or receiving a fax message
- Using a computer
- Additional interfaces
- What’s next?
- Using the web interface
- In this chapter
- Introduction
- The Home window
- Using the phone book
- Using the Call log
- Handling messages
- Setting up the EXPLORER™ 700
- Setting up the interfaces
- Enabling/disabling interfaces
- Description of data settings
- Configuring the USB interface
- Configuring the LAN interface
- Configuring the WLAN interface
- Configuring the Bluetooth interface
- Pairing Bluetooth devices from the web interface
- Configuring the Phone/Fax settings
- Configuring the ISDN interface
- Setting a common APN
- Properties, software upload and alarm list
- Administration
- Help desk and diagnostic report
- What’s next?
- Maintenance and troubleshooting
- Technical specifications
- In this appendix
- General specifications
- Battery
- Power input
- SIM interface
- Phone interface, 2-port
- ISDN interface, 2-port
- LAN interface, 2-port
- USB interface
- WLAN Access Point
- Bluetooth interface
- Antenna interface on Transceiver
- Detachable antenna
- EXPLORER™ Bluetooth Handset charger interface
- Solar panel interface
- I/O interface
- Serial number labels
- Conformity
- AT commands
- Glossary
- Index
Appendix B: AT commands
98-122988-DraftB6 171
AT+CBC Battery charge
AT+CBST Select bearer service type
AT+CCFC Call forwarding number and conditions
AT+CCLK Clock
AT+CCUG Closed user group
AT+CCWA Call waiting
AT+CCWE Call meter maximum event
AT+CDIP Called line identification presentation
AT+CEER Extended error report
AT+CFCS Fast call setup conditions
AT+CFUN Set phone functionality
AT+CGACT PDP context activate or deactivate
AT+CGATT PS attach or detach
AT+CGCLASS GPRS mobile station class
AT+CGCMOD PDP context modify
AT+CGDATA Enter data state
AT+CGDCONT Define PDP context
AT+CGDSCONT Define secondary PDP context
AT+CGEQMIN 3G quality of service profile (minimum acceptable)
AT+CGEQNEG 3G quality of service profile (negotiated)
AT+CGEQREQ 3G quality of service profile (requested)
AT+CGEREP Packet domain event reporting
AT+CGMI Request manufacturer identification
AT+CGMM Request model identification
AT+CGMR Request revision identification
AT+CGPADDR Show PDP address
Command Function