User's Manual
Table Of Contents
- Safety Summary
- Antenna Safety Instructions
- About the Manual
- Introduction
- Getting started
- Using the display and keypad
- Using the interfaces
- In this chapter
- General
- Bluetooth pairing
- Using a phone or fax machine
- Selecting the call type
- Connecting an analog phone or a fax machine
- Connecting an ISDN phone or a G4 fax machine
- Connecting a Bluetooth handset
- Entering the SIM PIN using a phone
- Making or receiving a phone call with the EXPLORER™ 700
- Making a call to the EXPLORER™ 700
- Dialing functions
- Sending or receiving a fax message
- Using a computer
- Additional interfaces
- What’s next?
- Using the web interface
- In this chapter
- Introduction
- The Home window
- Using the phone book
- Using the Call log
- Handling messages
- Setting up the EXPLORER™ 700
- Setting up the interfaces
- Enabling/disabling interfaces
- Description of data settings
- Configuring the USB interface
- Configuring the LAN interface
- Configuring the WLAN interface
- Configuring the Bluetooth interface
- Pairing Bluetooth devices from the web interface
- Configuring the Phone/Fax settings
- Configuring the ISDN interface
- Setting a common APN
- Properties, software upload and alarm list
- Administration
- Help desk and diagnostic report
- What’s next?
- Maintenance and troubleshooting
- Technical specifications
- In this appendix
- General specifications
- Battery
- Power input
- SIM interface
- Phone interface, 2-port
- ISDN interface, 2-port
- LAN interface, 2-port
- USB interface
- WLAN Access Point
- Bluetooth interface
- Antenna interface on Transceiver
- Detachable antenna
- EXPLORER™ Bluetooth Handset charger interface
- Solar panel interface
- I/O interface
- Serial number labels
- Conformity
- AT commands
- Glossary
- Index
Chapter 3: Using the display and keypad
98-122988-DraftB6 38
Connect menu
Streaming Profiles
Using the web interface you can define a number of Profiles for data transmission. The Streaming
Profiles defined and selected for the LAN interface appear in the CONNECT menu, and can be
started and stopped using the keypad.
Streaming Profiles are Profiles where the Traffic Class is set to Streaming in the Profiles window of
the web interface.
For information on Profiles, see Using Profiles on page 127.
For information on Streaming, see Standard or Streaming data on page 65.
Starting or stopping a Streaming session
To start or stop a Streaming session on the LAN interface, do as follows:
1. Select CONNECT.
2. Select the Streaming Profile you want to start or stop.
The list only shows Profiles that have been selected for the LAN interface.
For information on how to set up the LAN interface, see Configuring the LAN interface on
page 107.
3. Select START or STOP and confirm.
You can also start/stop Streaming sessions using the web interface. For further information, see
Setting up and activating a Streaming connection on page 65.
Calls menu
To see a list of calls or data sessions, select CALLS and then one of the following:
• MISSED: to see a list of incoming calls that were not answered.
• RECEIVED: to see a list of incoming calls that were answered.
• OUTGOING: to see a list of outgoing calls or data sessions.
Select a call from the list to see details such as time, date and phone number. If there was an
error, the call log shows the cause of the error when possible.
When there are more than 100 calls in the list, the oldest calls are automatically deleted to make
room for new calls.
If you need to preserve the call log, you can export it to a file using the built-in web interface. For
further information, see Exporting the call log on page 91.
Important
When running a Streaming session you are charged for the time you are
connected. An active Streaming session will stay active until you stop it.
Note
Local calls are not registered.