User's Manual
Table Of Contents
- Safety Summary
- Antenna Safety Instructions
- About the Manual
- Introduction
- Getting started
- Using the display and keypad
- Using the interfaces
- In this chapter
- General
- Bluetooth pairing
- Using a phone or fax machine
- Selecting the call type
- Connecting an analog phone or a fax machine
- Connecting an ISDN phone or a G4 fax machine
- Connecting a Bluetooth handset
- Entering the SIM PIN using a phone
- Making or receiving a phone call with the EXPLORER™ 700
- Making a call to the EXPLORER™ 700
- Dialing functions
- Sending or receiving a fax message
- Using a computer
- Additional interfaces
- What’s next?
- Using the web interface
- In this chapter
- Introduction
- The Home window
- Using the phone book
- Using the Call log
- Handling messages
- Setting up the EXPLORER™ 700
- Setting up the interfaces
- Enabling/disabling interfaces
- Description of data settings
- Configuring the USB interface
- Configuring the LAN interface
- Configuring the WLAN interface
- Configuring the Bluetooth interface
- Pairing Bluetooth devices from the web interface
- Configuring the Phone/Fax settings
- Configuring the ISDN interface
- Setting a common APN
- Properties, software upload and alarm list
- Administration
- Help desk and diagnostic report
- What’s next?
- Maintenance and troubleshooting
- Technical specifications
- In this appendix
- General specifications
- Battery
- Power input
- SIM interface
- Phone interface, 2-port
- ISDN interface, 2-port
- LAN interface, 2-port
- USB interface
- WLAN Access Point
- Bluetooth interface
- Antenna interface on Transceiver
- Detachable antenna
- EXPLORER™ Bluetooth Handset charger interface
- Solar panel interface
- I/O interface
- Serial number labels
- Conformity
- AT commands
- Glossary
- Index
Chapter 3: Using the display and keypad
98-122988-DraftB6 39
Settings menu
Point now
If you need to repoint the antenna after the first pointing process, select SETTINGS > POINT
NOW.
This will bring you to the Pointing screen, described in Pointing the antenna on page 24.
Setting the display backlight
To adjust the backlight of the display, select
SETTINGS > DISPLAY > BACKLIGHT.
From this menu you can set the backlight of the display. Select one of the following:
• ON: to turn the light on.
• OFF: to turn the light off.
• TIMED: to set how long the light should be on after the last key was pressed (2, 5, 10, 30 or
60 seconds).
• SET LEVEL: to set the level of backlight.
Setting the display contrast
To adjust the contrast of the display, select:
SETTINGS > DISPLAY > CONTRAST.
From this menu you can set the contrast of the display. Select one of the following:
• SET LEVEL: to set the contrast manually.
• AUTOMATIC: to let the EXPLORER™ 700 automatically adjust the contrast according to the
temperature.
The contrast of the display is affected by the temperature. The EXPLORER™ 700 can
automatically adjust the contrast so that the display looks the same, regardless of changes in
the temperature.
Turning audio indicators on or off
The EXPLORER™ 700 has audio indicators to indicate an event.
You can turn each of these audio indicators on or off.
Select SETTINGS > AUDIO INDICATOR and select one of the following:
• POINTING: a sound to indicate the signal level during pointing.
• MESSAGES: a sound to indicate that a message has arrived.
• ALARM: a sound to indicate that an alarm is present.
Then select ON or OFF.
Important
This function will interrupt any ongoing calls or sessions!