User's Manual
Table Of Contents
- Safety Summary
- Antenna Safety Instructions
- About the Manual
- Introduction
- Getting started
- Using the display and keypad
- Using the interfaces
- In this chapter
- General
- Bluetooth pairing
- Using a phone or fax machine
- Selecting the call type
- Connecting an analog phone or a fax machine
- Connecting an ISDN phone or a G4 fax machine
- Connecting a Bluetooth handset
- Entering the SIM PIN using a phone
- Making or receiving a phone call with the EXPLORER™ 700
- Making a call to the EXPLORER™ 700
- Dialing functions
- Sending or receiving a fax message
- Using a computer
- Additional interfaces
- What’s next?
- Using the web interface
- In this chapter
- Introduction
- The Home window
- Using the phone book
- Using the Call log
- Handling messages
- Setting up the EXPLORER™ 700
- Setting up the interfaces
- Enabling/disabling interfaces
- Description of data settings
- Configuring the USB interface
- Configuring the LAN interface
- Configuring the WLAN interface
- Configuring the Bluetooth interface
- Pairing Bluetooth devices from the web interface
- Configuring the Phone/Fax settings
- Configuring the ISDN interface
- Setting a common APN
- Properties, software upload and alarm list
- Administration
- Help desk and diagnostic report
- What’s next?
- Maintenance and troubleshooting
- Technical specifications
- In this appendix
- General specifications
- Battery
- Power input
- SIM interface
- Phone interface, 2-port
- ISDN interface, 2-port
- LAN interface, 2-port
- USB interface
- WLAN Access Point
- Bluetooth interface
- Antenna interface on Transceiver
- Detachable antenna
- EXPLORER™ Bluetooth Handset charger interface
- Solar panel interface
- I/O interface
- Serial number labels
- Conformity
- AT commands
- Glossary
- Index
Chapter 3: Using the display and keypad
98-122988-DraftB6 45
Dynamic information in the display
Types of display information
Text in the display can be:
• Information of received messages.
• Alarms.
•Status information.
•Request for action.
Received messages
When messages arrive in your EXPLORER™ 700,
the display indicates the number of new messages
that have arrived, and the red message indicator is
flashing.
The messages can be SMS messages or notification of voice mail.
If the message is an SMS message, you can go directly to the message list by pressing OK.
If the message is information of voice mail, you can press OK or C to go back to the Main screen.
The red message indicator will keep flashing until you have collected your voice mail.
To hear your voice mail, call the voice mail service number provided by your Airtime Provider.
To see the voice mail service number, select
PROPERTIES > VOICE MAIL NUMBER
Alarms
When alarms are issued in your EXPLORER™ 700,
the display indicates the number of new alarms,
and the red message indicator is flashing.
For further information, see Display of alarm
messages on page 146.
All alarms are logged in the alarm log. For information on the alarm log, see Alarm log on
page 152.
To view explanations for the alarms that may appear in the display, refer to List of alarms on
page 147.