User's Manual
Table Of Contents
- Safety summary
- About the manual
- Introduction
- Getting started
- Operating the system
- Using the web interface
- Introduction
- Entering the SIM PIN in the web interface
- Using the Dashboard
- Using the phone book
- Using the Call log
- Handling SMS messages
- Setting up the interfaces
- Managing LAN network users
- Uploading software
- Selecting the preferred BGAN satellite
- Selecting the language
- Administration
- Help desk and diagnostic report
- Event logging and self test
- Site map
- Troubleshooting
- Conformity
- Glossary
- Index
Chapter 1: Introduction
98-131305-A Main units 4
EXPLORER 325 terminal
Overview
The EXPLORER 325 Terminal is the controlling unit in the EXPLORER 325 system. It contains all
user interfaces and a LED indicator and stores configuration data. The terminal is designed to be
mounted inside a vehicle.
Tools for setup and daily use
The Thrane IP Handset can be used for displaying status, accessing a subset of controls and views,
starting a streaming session and entering the PIN code for the terminal. The IP handset connects
to the LAN interface of the terminal. For information on how to use the handset, see the user
manual for the IP handset.
The built-in web interface in the terminal is used for easy configuration and daily use. The web
interface is accessed from a computer connected to the terminal, using an Internet browser. No
installation of software is needed.
For further information on the web interface, see Chapter 4, Using the web interface.
SIM card
The terminal has a SIM (Subscriber Identity Module) slot located in the connector panel behind a
small cover plate.
The terminal requires a dedicated land vehicular SIM card, which you get from your Airtime
Provider.
The system requires a SIM card to go online and to access the settings of the terminal. However,
using the web interface you can view the Dashboard and upload software without inserting a SIM
card.